How to make a crown for a prince with your hands. How to make a beautiful crown for a child from scrap materials

What is the most important thing in preparation for the holiday?
Mood! How to create it?

Simple, quick and easy to make a crown for your little girl to make her feel like a princess or queen.

If you have a lot of time to prepare, then we make a kokoshnik on a frame, or using cardboard, we cut out a template, according to which we will make a crown for the Snow Maiden or a snowflake.

Unfortunately or fortunately, our kids are designed in such a way that they need a crown instantly, literally in a few hours, or even better in a few minutes.

Notice the crowns above. Each of them is done quite quickly, which cannot be said about these crowns in the next photo.

The first one is made using the kanzashi technique. A fairly well-known technique that has gained popularity is when a product is made step by step from ribbons. This first photo, you see, is beautiful and exclusive, but very fragile and not suitable for children.

The second photo is a creation made from beads; it can be either on a wire frame or without it. Look how sequins and large stones fit in here.
The rest of the beads complement and add charm. You will find all these details in any bead store, there will also be wire, stones and everything else that is required for such a creation.

Photo 3 is a kokoshnik embroidered with threads with beaded elements and made on a frame. Such beauty requires a lot of patience, attention and perseverance from needlewomen.

These crowns are very beautiful, but they are not suitable for little girls, since the time required and the amount of labor exceed the few minutes that little girls are willing to endure.

Therefore, let's consider quick ways creating crowns, while they are very impressive and beautiful, not at all inferior to kokoshniks, having the main advantage - they are light!

from foil;
from a plastic bottle;
from a peat pot;
from a cardboard roll;
frame decorated with tinsel;
from lace;
from paper.

We chose exactly 7, since hundreds of thousands of variants are made using these templates; they will differ only in details in execution or decoration.

Having begun to master the creation of a crown, we invite you to remember that it also requires. Lots of ideas and tips from slippers, tights to finishing touches on accessories and crowns.
How to make a suit from what you have at home or decorate a dress to create an exclusive outfit.

And the crown will look perfect on the hairstyles specially selected in this article. They are suitable for snowflakes and queens, Christmas trees, Cinderellas and princesses. Many photos and videos available will show how to repeat them on your girl’s head, which will make it easy to recreate them.
It's time to practice and make one of the suggested ones or your own version based on photo ideas.

Have you already chosen a hairstyle for your princess?

Foil crown

To create such a crown, you need a roll of baking foil, tear it off and make voluminous rolls, creating a ring, then attach the top to it.

The foil bends well and maintains its shape. In addition to the crown, you can make other signs of royalty.

It’s very easy to add new parts or entire units, the only disadvantage of this material is that if it’s compressed too much, it’s very difficult to straighten it out, but we recommend using everything you have at home and decorating it in 2 layers, giving it a “silver” look.

Crown made from a plastic bottle

We immediately found 3 options, they differ in the method of adding color and decoration, but the basis is the same - these are familiar and familiar plastic bottles that are found in every home.

Golden

The golden crown is plastic bottle painted with varnish, its main advantage is that it is not closed in a ring, it covers ¾ of the head, which allows anyone to wear it, a decoration according to their own opinion and taste.

Pay attention to the photo, painted plastic is well decorated with stones and other decorations.

You can buy them in the store or look for them from the needlewoman’s mother in her “hamster” supplies. Often purchased just in case. Choose sew-on stones or ones with a flat inner side.

What is the crown decorated with?

The stones are glued using a hot gun or superglue. Sequins are glued around them; one bag will be enough to decorate the entire surface. Beads are also suitable, but we recommend choosing small ones, they weigh less.

Diadem

To create a tiara, you need a 2 liter bottle and a template, according to which we will draw a design with sparkles. Then we carefully cut it out and it is ready, if there is still time, then we paint it and glue rhinestones and stones, so it looks more valuable.

Lilac

The base is a plastic bottle wrapped in glitter paper, and the front is decorated with rhinestones in the shape of shells or sequins.

Prepare a 5 liter bottle and draw the outline of the top part on it, first measure the baby’s head. The volume of the head should be equal to the length of the resulting shape and bottle.
To make it look beautiful and without alterations, draw the outline for the first time not with a permanent marker, but with a proofreader or pencil, and only after correcting mistakes with a marker. We want to reassure you, even if it didn’t work out the first time, it’s okay, because the front part will be decorated and the flaws will be hidden.
We cut out the edges and make sure that they are 1-2 mm larger than the contour, because By running a lighter along the edge, we will make the edges less sharp and dangerous for the child.
We cover the inside with shiny paper, this can be wrapping paper or from gift bags. We do this using tape, a hot gun, or whatever superglue we have on hand. Remember about double-sided tape, it will stick perfectly to the plastic and hold the paper.
We glue the sequins using a hot gun or superglue, applying from bottom to top so that the bottom layer overlaps the top.
We decorate the lower part with matching tinsel. For better fixation, use a stapler; it will speed up the fastening process and the staples will not be visible, because she's brilliant. Double-sided tape will also work.
To make sure the structure is strong, turn it upside down before trying it on, let it dry for several hours so that the glue sets everywhere, if you used it.

This crown is suitable for a queen or a mermaid, or maybe a butterfly or a queen. It all depends on the chosen color of the suit and the mood of your beauty.

Crown made from peat pot and cardboard roll

And these materials are definitely available in every home.

You will need: a cardboard roll of foil or baking sleeves or film, possibly toilet paper, paint, a washcloth, stones and sequins for decoration, a mustache clip, a hot gun or superglue, a paint brush and a pen.

Its production is very similar, with a crown made from a cardboard roll, so we will not give the second description.

We draw peaks on the crown so that we can see the necessary cutouts.
We paint with white paint, it’s better to take acrylic, we need to paint our future crown inside and out;
We cover it with golden paint so that our crown looks like a real one, we use a sponge for this.
We decorate with rhinestones, beads, sequins, then glue a hairpin for fastening.

When making from a cardboard roll, you need to make a bottom. Leftover rolls are perfect.

Place the crown on cardboard or any thick paper. Draw a circle according to the shape, but you should get 2 circles. One is equal to the diameter of the crown, and the second is 2-3 cm larger.
We cut out in a larger circle and make cuts, right up to the second circle, we bend these sections, we glue them inside so that the bottom holds tightly.
It is extremely important to glue inside, because... the outside will look less aesthetically pleasing, so make sure that you don’t get confused and that all the tails of the bottom are inside.
The remaining points are similar.

Frame decorated with tinsel

Tinsel or rain is wrapped very tightly on the finished frame, preferably with glue or 2-sided tape; if possible, add beads to the peaks of the tops.

It is important to check and remove any sharp or scratched parts using tape or other means. If there are sharp ends, drop them on them using a hot gun or dip them in PVA glue and let them dry.

Talk to your child what shape of crown she wants, show her different variants, but choose not the most complex ones.

Tinsel with a steel vein has appeared in stores; if you find it in a store, you will speed up the manufacturing process several times. There is no need to wrap anything, you just need to connect the individual parts.

We make a beaded crown on the frame, but such a crown cannot be called simple and quick, so it was left out of the top, but crowns sometimes turn out simply breathtaking. To make it you will need: pliers, round nose pliers, wire, beads and beads, a lot of time and patience.

Lace crown

We starch any lace we like or grease it with PVA glue (or rubber glue), let it dry, and paint it acrylic paint and give it the desired size (put it on a jar or bottle).

What to do if you don't have lace?

Take a closer look, perhaps there are some lace curtains or an unnecessary blouse with openwork elements. This will do too. You just need to cut out the desired openwork element of the required length and then everything follows the algorithm, so don’t worry, even if this piece is stained or stained.

The advantages of this crown are its simplicity and accessibility, the disadvantage is the time it takes to dry.
The video will teach you how to make a lace crown:

Paper crown

Paper is a material that is found in every home, so it is the easiest way to make a crown in a matter of minutes. Naturally, it will be far from festive and will be simple, but if you spend a little more time decorating it, you will see that it will surprise and delight many guests of the holiday party.
Which crown options are the simplest:

according to a paper template;
origami;
diadem;
kokoshnik;
from paper plate.

Nowadays, many templates have appeared on the Internet; if you print them out and place them on a hard base, you will get a crown; an alternative option is to glue them to cardboard.

Pay attention to the 5th and 6th crowns, just cardboard or paper decorated with sequins, and in the second case lace and some beads are glued on.

Before you start cutting out the crown, measure the child's head to determine whether it will be elastic or will fit tightly.

How to turn a simple crown into a work of art?

Choose a suitable simple template, the simpler the better. Apply it to whatman paper, print it out and transfer it in a pencil, or immediately draw peaks on whatman paper.
Cut according to the template to the required length. If the whatman paper is not very dense, then glue the inside into another layer or with colored silver paper.
Purchase from a craft store: silver-colored snowflakes, braid with rectangular or pointed, silver-colored rectangular parts, glitter glue or glitter (gel glitter), simply replace it with PVA glue and glitter.
On the cut out template we apply a pattern in shape reminiscent of drawing frost on the windows only in a very simplified version, leave room for snowflakes - they are the main accent of the crown, glue them using a hot gun or super glue. Lay a braid along the edge so that each bend has a border of them. If you don’t want to draw, then choose a piece of fabric with such a pattern in white or transparent.
Try on the finished crown and sew on an elastic band if you have planned one, but pre-treat the edges with tape or glue a wide elastic band if you did not glue the 2nd layer of whatman paper.

It is important to choose everything in silver color, then white + silver will look elegant and in the style of snow.

This crown is suitable for both a snowflake and the Snow Queen, as well as a princess or other fairy-tale characters.

For a crown using a template you need: a crown template, cardboard from a box, silicate and super glues, beads, beads, sequins, a hoop, rhinestone stickers, a container for glue, brushes for glue and a tool for laying out beads.

How this can be done at home is shown step by step in the video:

Crown for the Snow Queen

A kokoshnik is made from paper in the same way, as is a tiara, for decoration, tinsel or rain is often used, but the braid looks more advantageous, as do snowflakes instead of sequins.

Kokoshnik

Using origami technique

You will need: a sheet of paper and strictly follow the folding instructions, decorate it with rhinestones, sparkles, snowflakes, beads and seed beads to match your princess’s costume.
But that's not all to make a high crown using the origami technique. It is enough to bend the required sides correctly.

Please note that there are 2 instructions in the photo, so choose the version of crowns that you like best.

Our top is all closed, but one more type of crown is left out. The reason for this is that they are easy if you master the crochet technique.

Note for needlewomen

Simple crowns or kokoshniks, with and without beads

If you know the beading technique, you can make crowns like these for your pet. We recommend making crowns on a wire frame, then the problem of maintaining the shape will not worry you.

Crochet crown

To crochet a crown, we use non-cotton threads; remember, threads with lurex will make sequins and small rhinestones invisible.

Delicate crowns for snowflakes

We suggest right now to knit a crown in 30-40 minutes, even for a beginner!

You will definitely know the answer to the question of where to get it with video lessons for beginners.
Here is a crown on a headband, a hair clip, ideas for creating a crown for any head size. Just take 30 minutes and grab a hook and thread, and then the magic of transformation will follow.

Tie any of the crowns of the desired size and volume, all special calculations are given.

A few more secrets about tying beads, pay attention to the photo.

What to do if the threads are the wrong color?

When making a crown from threads of the wrong color, you shouldn’t be upset, you can paint it, but then you shouldn’t tie in beads, it’s better to sew them on later.

If you are knitting along the edge, another option is to put the beads on a loop, but if you want them to be on top of the product, then it is better to string them on a thread before knitting and knit them through a double crochet, so all the beads will lie on top. Single crochet, we show 2 knitting methods in the photo. 1 is an option on the Russian-language Internet, and 2 is an English-language option.

Now you have a lot of ideas and ready-made instructions for implementation, if you found our review useful, click on the buttons on social networks.

If you have a boy, then we offer you variations of crowns. So which crown will suit your knight? It's time to choose and make a crown with your own hands according to his order. Moreover, master classes with photo and video instructions.

And also New Year's costumes: squirrels, hedgehogs, bunny, for everyone who wants to look original and surprise their friends and those invited to the holiday.

And if you need more ideas for creativity and tips, then pay attention to this link l. Many will receive a prize for original costume! It's time to start right now and create your own version New Year's costume, because you are limited only by your fantasies.

Step-by-step master class on making a universal crown

This crown is ideal because it has no size and is simple, suitable for both a very young snowflake and an older one.

You will need: a thick elastic band or stretchable bandage, a plastic glass, snowflakes, lace and all the beautiful sequins and half-beads for decoration.

Cut out a shape similar to a tiara from a glass.
Sew the elastic band to the plastic form on both sides.
We cut off the bottom of the glass, where there is a curved sill, and decorate it with lace, sew it to the bottom with stitches using a needle and thread. We glue half beads on top of the lace to create the desired accents.
We lay out a tiara from snowflakes and glue it using a hot gun or superglue.

How to make a universal crown for any size head for a snowflake, video master class:

Tiara crown

We will need: an old tiara, mesh with sequins, tulle of 2 densities blue and white, snowflake, scissors and threads, sewing machine.

In order for our snowflake to be fixed and stay on the tiara, it is necessary to make a hard backing from tulle.
To do this, measure the size of the snowflake, applying it to the tulle and make a cut with a margin. From the resulting piece we make a dense, dense assembly either with a needle or with a machine. The denser the base, the better, so we make assemblies frequently.
The resulting volumetric part will not suit us; we need to make it flatter and evener using an iron with the tulle or guipure mode.
We adjust the blue tulle onto white.
The third layer is a thin white tulle, it will be the background for the snowflake. Therefore, we lay it in an uneven fold and then attach it.
We cut off the lower uneven edge of the tulle, then glue the tiara to it on top, thereby covering the seam. Glue using a hot gun.
Similarly, glue a snowflake in the center.
We cut off all 3 layers giving the crown a shape similar to a diadem. We move from the sides to the center, where our snowflake is located. Check that it is symmetrical.
Then use an iron to add volume and fluffiness to the back layer.
The fairytale princess's crown is ready, it's time to try it on and go to a ball or matinee at school or kindergarten.

Video on creating a crown from an old tiara:

Beaded crown

Beaded crown with bezel

Crown of Autumn

Autumn crowns are another type of individual beautiful jewelry, with which it’s time to delight your girls in the fall, when there are especially many autumn leaves.

How is a crown made from leaves?

There are many options for creating autumn crowns:

we weave a wreath from maple leaves;
from maple leaves by darning the tips of adjacent leaves;
we glue or screw the leaves onto a finished frame made of paper or wire;
We cut out leaves from paper or other materials and glue or sew them in the desired sequence.

On a rim of leaves

Secure the leaves with tape

Another option with threads for attaching to the rim

Autumn paper crown

Leaf darning method

forest crown

A chic crown made of: hoop, wire, beads and roses.

Detailed video on creating a crown:

Have a great mood and inspiration for creating a costume with a crown.

A crown made of cardboard or paper is the most popular craft for children, both girls and boys. Let's look at how to make a crown with your own hands from paper, cardboard, wire or lace.

For roles in various performances, you may need a crown. So, let's look at several options for how to complement a girl's festive outfit in the form of a crown.

How to make a crown out of cardboard with your own hands

To solve this problem we will need:

scissors;
cardboard;
foil;
pencil;
glue.

Small cardboard crown

1. In order for the crown to fit well on the head, you need to measure the circumference of the baby’s head. Please note that the crown will need to be secured - so measure a few centimeters more. Having chosen a certain length, cut out strips of cardboard.

2. The height of the crown depends on your preferences. On the top of the cardboard strip you will need to draw the “teeth” of our crown, and then cut off the excess parts strictly along the contour. Our next action will be to unwind a roll of foil to the length of our crown. Now you should coat one side of the cardboard with glue. You need to attach this side to the foil with the “teeth” towards the edges. Next, step back a few centimeters from the crown and cut off the foil.

Crown made of cardboard and beads

3. The part of the foil that remains should be tucked along the cardboard and glued to the other side. Give the crown time to dry. Then you should cut the foil between the teeth, and wrap the foil around each tooth. At the end you just need to connect our strip into a circle.

Another option is how to make a crown from cardboard. Take cardboard, stapler, pencil and scissors. On cardboard, draw a crown with classic teeth. Cut it out and join it into a circle. To make the crown more dense, you can connect several layers of cardboard using a stapler. The crown can be decorated with beads, sparkles, rhinestones, covered with tinsel, or wrapped in foil. You can glue colored rain along the contour of the crown.

Paper crown

How to make a crown out of paper? First, you should draw a diagram of the crown on paper - this will be necessary in order to understand how many parts we will need.

We will need:

stationery knife;
white paper;
red and gold colors;
glue.

1. Now you should cut the sheets of paper into strips that will have a width of seven millimeters and a length of twenty-five centimeters.

2. To make the base of the crown, you need to use strips of red and white flowers make twenty diamonds and twenty circles. How to make the first row of the crown? You just need to glue the resulting circles together. What will the second row look like? These will be diamonds that should be glued between the circles. All subsequent rows alternate. Don't forget to alternate colors.

3.
Now we will make a snowflake, which will become a decoration for our crown. We will need blanks made in the form of drops and in the shape of diamonds - eight white diamonds, seven gold and seven red drops. Glue the snowflake well to the base of our crown. Be sure to complement the crown with droplets and diamonds of white and red flowers.

4. To make the crown more magnificent - gold diamonds should be added to the upper part of the crown - glue strips twenty-five centimeters long together. Be sure to leave it overnight to allow the crown to dry.

How to make a wire crown

When wondering: how to make a crown, you can use the most various ways and materials for its manufacture. Let's look at the most popular of them.

Wire crown

For example, you can create an exquisite crown from wire and beads.

You will need:

pliers;
wire;
glue;
beads.

Using pliers, you need to bend a frame from thick white wire, which should then be wrapped in silver rain. You can choose any shape for the crown frame. But the dimensions of the frame must correspond to the size of the baby’s head. It is worth saying that this is not an easy task and requires considerable time.

Crown for the Snow Queen

How to make a crown for snow queen?

You will need:

copper wire - it should be very thin and of medium thickness;
pliers;
beads of various shades;
ruler.

Take a ruler and measure what size the teeth on the crown will be. Cut the wire twenty-five centimeters long. To make the frame of the crown strong, you need to make it from wire folded three times, and do not forget to twist another layer of wire on top. We have a large wire ring. Divide the completed frame by eight equal parts. Select places on the wire where you will attach the bases of the teeth. Beads need to be secured to the peaks of the crown. Large beads are suitable for this task. They can also be secured with wire - the wire is threaded through the bead and secured to the peak.

Lace crown

We will need:

lace ribbon with rounded curly or jagged edges. We select the length according to the size of the head circumference, plus a few centimeters in order to fasten it into a circle or for Velcro;
starch or a special spray to make the crown hard;
acrylic paint;
scissors;
needle;
threads;
glue "Moment";
brush;
glass jar (three-liter);
decor (beads, stones, seed beads).

1. Cut the lace to the desired length and then roll it into a circle. We sew it very carefully so that the threads are not visible. Afterwards, we heavily starch our entire product. We straighten the resulting crown and put it on glass jar. Let it dry.

2. After everything has dried, we begin to paint it with a brush. The paint can be applied only to the edges of the crown or to the entire surface.

3. When the paint has dried, use glue to fix the beads, stones or seed beads to the crown.

SELECTION OF IDEAS

Crown made of paper and cardboard

Wire crown

Lace crown

How to make a lace crown

It is very important to use accessories in children's games. They give the game a realistic touch, and are appreciated even more if they are made by hand. A paper crown can be used not only for entertainment, but also for theatrical performances held in kindergartens and schools. Hurry to please your child, and we will tell you how to make a paper crown at home.

Paper crown

To get started, prepare:

Now you can get down to business. We perform the following actions:

Paper crown: option 2

Let's make the crown in a different way. For work take:

cardboard with low density;
elastic band;
hot glue gun;
elements for decoration (can be replaced with felt-tip pens, paints or pencils).

Let's do the following:

Color the crown with whatever you want: paints, felt-tip pens, pencils.

Volumetric crown with golden shimmer

This crown will be a little more difficult to make than the previous ones.

Prepare for work:

paper;
glue;
scissors.

We do the work:

Smooth the finished crown with your hand and you can put it on!

Crown for a girl

Prepare the following materials:

high-density colored paper (30 cm wide and 30 cm long);
cardboard;
scissors;
compass;
glue.

We make a crown for a girl as follows:

Snow Queen/Princess Crown (with snowflake)

To do beautiful crown, prepare a sheet of paper, scissors, glue.

We perform the following actions:

Draw the outlines of the crown (you can use templates).
We cut strips of colored paper, 25 cm long and 7 cm wide.
For the base of the craft, we make circles in the amount of 20 pieces, diamonds in the amount of 2 pieces. We connect the circles with glue to get the 1st row.
Glue diamonds in the gaps between the circles. This will be the 2nd row. We repeat the procedure, alternating circles and diamonds.
To make a snowflake, glue together multi-colored rhombuses and circles and fix them in the center of the crown.

Advice! To make the crown look more magnificent, make each subsequent row a little larger than the previous one.

A crown made using the quilling technique looks very beautiful.

Monarch headdress for boy

Any boy will be happy with the chic crown of a real king.

You will need:

a sheet of high density paper;
scissors;
glue;
rhinestones and beads for decoration.

How to do?

Make a strip for the base of the crown and glue its ends together.
Take paper of a different color and cut out 2 more strips, which should be wider than the previous one. Glue them to the base with the letter X. Measure it on your head and see if anything is in the way.
Cut out 6 stripes to decorate the crown. Trim one end of the strips to create a semi-circular oblong border line. Glue the opposite side of the strip to the base of the craft from the inside. It turned out something like the sun with rays.
Study the photo of the crown and give the stripes the appropriate shape. Attach the decoration to the top. Decorate the craft with the prepared decorative elements.

Cutting templates

Video instructions

The training videos selected for you will help you understand the subject and working methods in detail and choose the appropriate option.

Origami crown:

Royal Crown:

Foamiran crown:

Crown of the forest fairy:

If your child needs to dress up as a prince or princess for a party, he will need a crown. You can make it yourself from paper, mastic, beads and other materials.

You can make a crown with your own hands from paper, mastic, beads and other materials

Paper decoration

There are many options for how to make a crown out of paper, the main thing is to show your imagination and creativity as much as possible. Manufacturing options:

From golden-colored paper, cut into squares of the same size, 10x10 cm in size. Fold each piece in half diagonally, then insert the resulting triangle into another and glue it together. The number of parts depends on the size of the head.
You can also quickly and easily make a crown from a paper plate. You need to divide the plate into 8 equal triangles, combining them at the central point. It is important that the edge of the plate remains intact. The finished crown can be decorated with various beads or sequins.
Another option is to make a crown with your own hands - from paper strips twisted at the ends. You must first prepare a base equal to the circumference of the head, and then glue the strips onto it.

Cardboard craft

A cardboard crown is more durable, stronger and holds its shape better. For a special occasion, you can make a crown from corrugated cardboard. The craft can be either with sharp corners or rounded. The edges are secured with a stapler or glue. You can decorate with sequins and artificial stones.

Beaded crown

To make a beaded crown with your own hands, you will need the following materials: 2 types of wire (thick and thin section), pliers, beads, pearls, beads. From thick wire you need to make a base that matches the circumference of your head. From the remains of thick wire, form a frame - waves or triangles, and secure it to the base with thin wire. Next, you should string beads, beads and pearls onto a thin wire, and then attach all this with the help of wire to the main part.

There is another option: the main part is performed in the same way as in the previous case, and corresponds to the circumference of the head. Next, instead of waves or triangles, you should cut the wire different lengths and string beads or seed beads onto it, and then attach the resulting strips to the main, pre-decorated part. You can use beads, pearls and beads of different sizes.

Felt crown

For a New Year's party for a girl in fluffy dress You can offer a crown made of felt, which is also made by hand. Felt is a very unpretentious and fairly dense fabric that does not have a front or back side. The fastening of felt parts can be done by hand, using a sewing machine, PVA glue or a glue gun - with any of these types of fastening, the aesthetics of the fabric does not change.

To make such a crown, you need to take a piece of 25x8 cm. For strength, you can use fabric in 2 layers, but in most cases one layer is enough. You can choose a shape using a ready-made template or make your own original one, unlike any other. There is no need to fasten the edges together - in order for the product not to fall off your head, you need to sew an elastic band or satin ribbon. For decoration you can use rhinestones, sequins, and beads.

Lace crown

This crown is original decoration for a charming little princess. You will need lace and fabric hardener. Before starting work, you need to decide on the size; for this you need to make a cylinder out of cardboard that matches the size of the future crown. When the cylinder is ready, you need to cover it with cling film, pull the lace on top and secure the edges, then carefully treat it with fabric hardener and leave to dry.

After the lace has become sufficiently hard, it needs to be removed from the cardboard, painted, dried and started decorating.

Advice! Instead of a hardener, you can apply spray paint of the desired color to the lace. It dries much faster and gives the necessary hardness to the product.

Autumn crown

The autumn crown is made for the autumn holiday, and is made mainly from maple leaves. Before work, you need to cut off the ends of the cuttings from the leaves. Then take 2 leaves and bend them at the base, insert one leaf into the other and fasten them together with a handle. This is how all the other leaves are held together. The finished crown can be decorated with rowan fruits.

In a megalopolis, it is not always possible to find maple leaves. In this case, you can use paper and paints to create an autumn crown. To make it you need to first draw, cut and paint the leaves. Glue paper leaves onto a strip of cardboard, the length of which should correspond to the circumference of the child’s head.

Children's crowns with letters are made for first-graders for the ABC holiday.

In order to make such a crown, you will need 2 sheets of white cardboard and a letter of the corresponding color (denoting a vowel sound in red, a consonant in blue). It is best to immediately cut out the letter from colored paper. The headband is made of white cardboard, its width should be no more than 4 cm, the length of the headband is equal to the circumference of the head, the edges are secured with a stapler. From the second sheet of cardboard you need to make a semi-oval, onto which the letter will subsequently be glued. The outline of the letter must be outlined in black, and all the parts must be connected to each other.

Crown on digital

A children's holiday is always joy and fun. To make this day more memorable for your child, you can add your own twist, for example, make a three-dimensional number corresponding to the child’s age and put a crown on it.

It is best to make a number from cardboard, since this material, despite its lightness, perfectly holds the shape of the product. Another material from which a number can be made is foam plastic. The size of the number can be very varied - from average to corresponding to the height of the child. After the number is ready, it is necessary to give it an aesthetic appearance by covering it with paper of the same color.

You will need several packs for decoration. paper napkins, glue, scissors and stapler. Napkins can be used different colors, but choose according to shades so that there is a match.

You need to make flowers from napkins. To do this, the napkin is folded in half, and then again, the resulting square in the middle is fastened with a stapler, a circle is cut out of it, each layer of the napkin is folded upward, and flower petals are formed. You need to make a large number of flowers and stick them on the letter.

After the figure is completely ready, you can make a crown for the figure from a piece of ordinary colored cardboard that differs from the color of the three-dimensional figure. It can be secured to the top of the number using a stapler or glue.

All fathers and mothers have princes and princesses. And since the attribute of noble persons is a crown, you definitely need to get one. After all, sooner or later your royalty will have to put this symbol of greatness on their heads - at least as an element of costume for a matinee. This is when tips on how to make a crown out of cardboard will come in handy for parents.

No matter how wonderful a fancy dress for a prince or princess, king or queen is, it won't look right without a crown. In addition, cardboard hats can also be used as:

game element;
gifts for guests who came to the birthday party.

Making a crown out of cardboard with your own hands is very simple; even a child can do it. Moreover, it will take very little time, but the joy from a successful creative process is guaranteed.

For cardboard hats, as the definition suggests, you need cardboard and glue. The quality of these materials determines how durable and beautiful your craft will be. As for glue, it can be regular PVA. It is only important that its consistency is not watery, otherwise unaesthetic wet spots will remain on the cardboard. You can also use Moment glue, especially for models that involve decoration with beads or rhinestones.

It is also very important to choose the right cardboard. It should be:

dense, but not thick;
smooth, not corrugated.

That is, the base material should hold its shape, but at the same time bend easily. Cardboard for children's creativity, which can be purchased at office supply stores.

6 models of cardboard crowns

To make the royal headdress neat and realistic, do not be lazy and first draw a paper pattern, and only then trace it on cardboard and cut it out.

Vintage decoration

Cardboard covered with newspapers or vintage paper will make the crown ultra-modern and at the same time stylized as antique.

Materials:

cardboard;
pages from newspapers and sheet music;
stationery scissors;
PVA glue;
glue "Moment";
brush for applying glue;
rhinestones, sparkles;
centimeter.

Instructions:

Resourceful parents came up with the idea of making crowns with an elastic band so that the royal headdress would last for many years.

Materials:

cardboard;
newspaper;
heat gun;
rubber;
awl;
stationery and manicure scissors;
threads, needle;
paints, felt-tip pens;
rhinestones, beads, glass beads.

Instructions:

Golden headdress

You can make an elegant and sophisticated king's crown with your own hands in just half an hour. For this you will need colored cardboard.

Materials:

golden cardboard;
PVA glue;
pencil, ruler;
stationery scissors.

Instructions:

Princess model

If you are thinking about how to make a cardboard crown for a princess, or more precisely, which model to choose, then turn your attention to a mixed type headdress. Paper, beads, sewing, and applique work well together in it.

Materials:

cardboard;
80 weight colored paper;
compass;
a simple pencil;
stationery scissors;
PVA glue, “Moment”;
rhinestones, sequins.

Instructions:

Cut out a rectangle 15 x 30 cm from cardboard.
Using a compass, we draw small circles and cut them out - these are decorations for the crown.
Glue the round blanks onto the rectangle.
Cover the base with colored paper.
We make a decorative seam along the top edge.
We cover the crown with rhinestones, colored paper applications and sequins.
Glue the sides of the headdress together. The craft is ready.

Humble Grace

If there is absolutely no time to make a crown, then you can get by with a small model, like the Princess in the cartoon about the Bremen Town Musicians.

Materials:

empty cardboard toilet paper roll;
scissors;
glue "Moment";
foil.

Instructions:

Cut cloves onto the roll.
Carefully cover the workpiece on both sides with foil.

The Russian style crown is made in the form of a kokoshnik.

Materials:

colored cardboard;
A4 sheet of paper;
hoop;
rubber;
glue gun;
a simple pencil;
scissors.

Instructions:

On paper we draw half of the kokoshnik-crown.
We attach the pattern to the cardboard, folded in half, and cut it out.
We make a couple of small cuts on the top of the kokoshnik to make it easier to roll it into a circle.
Glue the blank onto the hoop.
Glue a piece of elastic to the edges of the hoop.
We decorate the headdress.