To sew a half-sun skirt with a zipper, you don’t have to be a professional seamstress with extensive experience. Patience and a couple of hours of free time will help you sew a cute skirt for every day or for a holiday. The master class will be available to beginning seamstresses and craftswomen.
What do we need to sew a half-sun skirt?
- any thick fabric for sewing formal suits or trousers (1 m by 1.5 m),
- zipper (12-15 cm),
- non-woven fabric for processing the belt,
- tape measure,
- chalk or soap,
- threads,
- needles,
- scissors and other sewing supplies.
How to sew a half-skirt with a belt quickly and easily for beginners
We will build on fabric. Fold the fabric in half (face to face).
We measure the waist circumference (in our case it is 66 cm). Divide the waist circumference by 3, we get 22 cm. From the right corner of the fabric on the fold side, measure 22 cm in both directions and draw a circle. In order for the skirt to have beautiful waves, we will have to gather the fabric a little at the waist. To do this, measure 5-6 cm from the existing circle in the other direction from the corner and draw a second circle.
The second (lower) circle will be the waist of our skirt. Next, we decide on the length of the skirt. In our case, the length of the skirt will be 40 cm. We measure 40 cm from the waist line in both directions. We draw a circle that will become the bottom of our skirt. We cut out the “skirt”, leaving 1.5-2 cm allowances on the bottom and top sides.
Next, let's work on the belt. On the folded fabric, draw a slightly curved rectangle (66 cm by 5 cm). Cut out a rectangle of the same size from non-woven fabric. Don't forget to leave 1.5-2 cm allowance in the waistband on all sides.
Using an iron, “glue” the interlining to the wrong side of the belt.
We sew together the 2 upper parts of the belt.
We turn it inside out so that the seam of the fabric “slides” a little onto the inside of the belt.
In order to sew in a zipper, we will need to topstitch the edges of the skirt, which will be the back seam. Don't forget to leave 7-10 cm from the waist for the zipper. Why so few? Because part of the zipper will be on the belt.
Now lightly gather the fabric at the waist in four places so that the waist circumference matches the length of the belt. Don’t forget to leave a few centimeters at the edges of the skirt and on the waistbands for the zipper.
We connect the skirt with the belt using machine stitching. First we sew the front side of the belt, then the back side. Try to ensure that the wrong side of the belt covers the edges of the skirt at the waist. Don’t forget to finish the visible edges of the fabric with a zig-zag stitch or overlock.
We sew a zipper (preferably a hidden one) into the remaining slit on the skirt.
Fold the bottom of the skirt 0.5-1 cm and hem it. Don’t forget to iron the skirt thoroughly so that the waves on it don’t stick out in different directions.
Elizaveta Rumyantseva
Nothing is impossible for diligence and art.
Content
Beginner sewing needlewomen are sure that sewing on a hidden fastener is problematic. It should not be visible in the finished product, and this is important when the item combines beautiful fabric and an original style. After looking at the accessory in person, women wonder how to sew a hidden zipper as neatly as possible.
What is required for work
The hidden clasp differs from the usual one in its design. On the front side of the finished product, only the runner is visible, and the teeth are on the back. Everything looks beautiful and neat because the edges of the material are tightly pressed together. How to properly sew a hidden zipper and what is needed for such work?
If this is your first time doing this, you will need attention and patience. After the first lesson, next time you will do everything quickly. First you need to buy a lock of a suitable color. The required length is 20 centimeters. Please note that the teeth on the reverse side should bend, forming a groove for stitching. To work you will need:
- threads in the color of the material;
- needle;
- pins to pin the fastener before basting;
- sewing machine;
- special foot;
- padding to strengthen the edge - doublerin or non-woven fabric.
How to use dublerin
Stores offer a huge selection of materials for sewing. There are heavy, dense fabrics, knitted fabric and weightless silk. Each type requires special techniques, its own approach to sewing. There will be no problems if you decide to sew a hidden lock into a product made of thick fabric. Another thing is stretchy, loose materials. How to sew a hidden zipper into a skirt in this case? A special fabric - dublerin - will help you.
This is a strip of very thin lining material with a layer of glue applied to it, which looks like small grains on one side. Before sewing on the lock, double stitching is basted along the line along which it will be attached. The lining is installed with the adhesive side to the fabric and secured with a hot iron. Edges reinforced in this way will not stretch. If the fabric is glued well, everything will be sewn neatly.
Which foot is needed for a hidden zipper?
Worried about how to sew a hidden zipper into a skirt? Just buy a special foot. Modern machines include a device that is suitable for ordinary locks; if you try, you can sew in a hidden one. It is more convenient to do this with a special foot. It has grooves at the base into which the teeth fit, opening a place for grinding. The needle is stuck close to them - so that after sewing the stitching is not visible. You can buy a metal or plastic foot, but the first one will last longer.
How to sew a hidden zipper into a skirt
There are many ways to sew in a hidden lock. Experienced craftswomen do this without basting, right away. Some people only use pinning, gradually removing them as they sew, so as not to break the sewing machine needle. It is better for novice needlewomen to perform the operations sequentially, chopping and basting the lock. Over time, you will choose the appropriate technology for yourself to sew in a hidden fastener; you will do it easily and simply.
Where the lock will be sewn is up to you. This can be a side or middle seam at the back - it doesn’t matter for the execution technique. How to sew a hidden zipper into a skirt? According to technology, it is better to do this:
- fold the fabric in half where the fastener is stitched;
- make an allowance of 1.5 cm from the edge and draw a seam line;
- sweep the product along this marking;
- overcast each edge separately;
- iron the seam according to the basting;
- straighten it and iron it;
- on the wrong side of the product, attach the lock with the teeth down so that they align with the middle of the seam;
- The slider should line up with the hem line of the top edge of the skirt.
Steps for sewing a hidden lock:
- pull the slider to the front side;
- pin the lock across with pins, under the teeth;
- baste to one layer of hem, making a seam in the middle;
- remove pins;
- fully open the clasp;
- stitch one side using a special foot, which will bend the edge with the teeth;
- repeat the operation on the other side, if the fabric is slippery - satin or silk - it is necessary to stitch from above each time;
- make a fastening seam on the wrong side about 1 cm at the bottom of the lock;
- sew the back seam to the end;
- make a facing for the top of the skirt;
- do the processing and hem the hem.
Features of knitted products
There are nuances on how to sew a hidden zipper into a knitted skirt quickly and without problems. The technology itself remains unchanged, but preparatory work needs to be done:
- buy a special needle for knitwear - it has a rounded end;
- select the step length on a separate piece of fabric;
- check line;
- glue the place where the lock is stitched with a non-woven or dublin gasket;
- To properly pull the fabric when sewing, place a strip of paper under it.
Good afternoon, dear readers. You probably know that every woman should strive for constant development, study, try something new and useful. That is why today we will talk about how to sew a zipper into a skirt correctly, step by step.
Stages of flashing a hidden zipper
Now we will tell you about a method that will help you quietly sew a hidden zipper to a skirt. The main convenience is that it doesn’t matter at all where exactly the zipper will be located - in front, behind or on the side.
Product preparation
The selected technology requires the following steps:
- In the place where the sharpening will be sharpened, the fabric is folded into two layers. In this case, an allowance of 1.5 cm is made from the edge and a seam line is drawn. The product must be swept, focusing on this mark.
- Then, you need to overcast each edge separately. After this, iron the seam, straighten it and iron it thoroughly.
- The lock is applied with the teeth down on the wrong side of the skirt. You need to make sure that the teeth align with the middle of the seam. And the slider should coincide with the hem line of the top cut of the product.
After this, it’s time to start sewing on a metal or iron hidden zipper step by step:
- The slider is pulled to the front side, after which the lock is secured with pins across, directly under the teeth. This should be done carefully so that the fabric does not move.
- The next step is to make a seam in the middle. To do this, simply baste the zipper to one layer of the hem.
- After this, the pins are carefully removed, and the clasp is opened to the very end.
- Using a special blind-lock foot that folds back the serrated edge, you need to sharpen one side. The same operation is performed on the other side. And if the fabric is slippery, then the lock is stitched on top.
- A securing seam is made on the wrong side (about 1 cm down from the lock). After which the back seam is stitched to the very end, but very carefully.
- All that remains is to do the facing of the upper part of the skirt, and at the end - to carry out processing and hem the hem.
We also suggest watching the video below. Thanks to him, you can learn how to quickly sew a hidden zipper into a side seam:
Skirt with a belt: how to sew a zipper into a skirt yourself
Have you ever sewed a skirt with a belt? If not, then be sure to try it and don’t worry about how to sweep the zipper correctly. There is nothing complicated about this if you follow simple rules. Namely:
- At the very beginning, the blank belt is folded in half lengthwise. After this, you need to carefully iron it with an iron (you can use it through gauze), and then sharpen one side of the skirt to the top cut.
- Using pins, be sure to secure the upper edge where the belt bends. Everything is carefully basted, but the seam where the hidden zipper will be attached is not sewn now.
- The next step is to sew in the fastener. Don't forget to sew the back seam so that the resulting “design” holds up well.
- Now is the time to bend the waistband over the ironed area and sew it completely.
Important. The side seam, which should cover the fastener, in this case is sewn by hand.
If you sew a hidden zipper into a skirt with a belt in this way, it will not be visible at all. In addition, this will take very little time even for a novice needlewoman. You just need to be careful and have a little patience.
Pro tip: how to sew a regular zipper
Very simple instructions that allow you to sew a zipper into a skirt without any hassle:
- Using the usual construction method, two parts of the skirt are sewn together in the place where the zipper will be located. The seam is then unrolled and the fabric is gently ironed with a low temperature iron.
- A zipper is applied to the seam (from the unfolded fabric). It must be fixed in a level position using regular tape or double-sided adhesive tape.
- Using a sewing needle, the zipper is fixed on the outside of the skirt. After this, the zipper is stitched, and the tape is carefully removed from the fabric.
- Using a seam ripper, the very first seam is carefully removed. After which the zipper is completely ready for use.
We also invite you to watch an additional video, which will talk about how to properly sew an open zipper into a sun skirt:
Sew a zipper with a lining without stitching the seam
This procedure is a little more difficult to perform than all the previous ones, but it is still possible. To do this, follow the following instructions:
- The sides of the fastener are aligned, and then its length is marked. You need to leave 2 cm of excess zipper.
- Then the first part of the braid is sewn to the markings on the skirt. After this, the second part of the zipper tape is sewn on.
- Before stitching the seam near the braid, the zipper must be closed.
- At the next stage, the skirt is connected to the prepared lining. In this case, the length of the cut for the fastener in the lining and in the skirt must match.
- Next, the seam is carefully bored out. After this procedure, the sides of the fastener on the skirt itself and the lining should be the same length.
- All that remains is to machine the lining to the seaming allowance for the lock and at the same time shape the top of the product in the fastener area.
At the end of the article I would like to please you with another master class, in which an experienced master will show you how to sew a zipper into a skirt (tulle):
Until we meet again, dear readers. May everything be easy for you!
And skirts. It can serve not only for its intended purpose, but also simply as a... Zippers are sewn along the middle line of the back, or front, into the side seam, pockets, codpiece, and so on. Vertically, horizontally, obliquely, openly and hidden (secret) way. Colors can be selected to match the fabric or contrast. Hidden zippers, as a rule, are precisely selected by color and shade.
In contact with
Threads for stitching, if there is no need to emphasize the presence of a fastener, are also chosen exactly to match the fabric. The number of threads is the same as required for sewing this fabric; in the case of finishing stitches, the thread is taken thicker.
Materials and tools
To work you will need the following devices and fittings:
- threads;
- sewing needle;
- safety pins for pinning and basting;
- sewing machine;
- special foot;
- gasket to strengthen the edge (non-woven fabric or).
There is now a wide selection of materials in stores. If the lock is sewn into products made of dense fabric, then there will be no problems, but when installing a hidden lock on stretchy knitted material or very thin fabric, you will need doublerin. This is a strip of lining material that has a very thin thickness, and a thin adhesive layer is applied to it.
Before installing the zipper along the line where the stitching is supposed to be done, dublerin is basted. This lining is applied with the adhesive side to the material, then secured with a preheated iron. This procedure prevents the edges of the fabric from being pulled out. With good gluing, the zipper will be sewn well and will look neat.
How to sew a hidden zipper to a skirt
To begin with, if you have never done this operation before, then it is better to try sewing a lock on some unnecessary product or a separate fragment to gain some experience. Once you are convinced that you can do this, you can begin working with the main product.
Advice for seamstresses who do not have sufficient experience: it is easiest to sew the fastener into the back seam of the product, since if the fastener is sewn incorrectly on the side, the fabric may become skewed and symmetry will be lost. . It won't be very noticeable on the back seam., since it is more symmetrical, it is much easier to sew the necessary lock there than in the side one.
Procedure:
It is necessary to hide the presence of the fastener as much as possible, so sewing it on unnoticeably and carefully is a very important procedure. At the same time, the lightning should move freely, do not get stuck or break from stitching too close. Its length varies depending on the size and intended model.
An incorrectly sewn zipper can deform the product. In addition, if the fabric is too thin (also very elastic and thin knitwear), then the end of the fastener may stick out angularly, in this case it is preferable to sew the fastener along the middle line of the back. Therefore, learn to sharpen locks correctly.
Various options
The procedure for sewing a fastener to a skirt with a belt
If the skirt has hooks or buttons, then the beginning of the zipper should be located under the belt. If the belt does not have any, then the zipper is sewn in from the very top line. In this case, the fastener is stitched from top to bottom. With this approach, it will not deform the fabric, and it will be much more convenient to install it.
After the lock has been attached, the top edge must be disguised under the belt. To do this, you can tuck the edges of the lock and stitch it. Sometimes pieces of fabric are placed over the fastener. This is done so that the zipper does not create unpleasant moments in the form of scratching the back.
When placing a side hidden fastener there are some nuances. There is symmetry in the back seam so it stretches evenly on both ends. If the lock is in the side seam and is sewn carelessly, then the skirt will be skewed and the fabric will gather in waves. These shortcomings will spoil the picture. Therefore, the zipper is the final element of the skirt. When installing it, you need to be careful. It should be maximum.
How to sew a lock into a skirt without a belt
If the product does not have a belt, then the choice of fastener must be made in such a way that there are no incidents in the form of unfastening, that is, the zipper must be tight. The grinding process will be performed as follows:
- First you need to sew on the zipper.
- Then fold the top edge of the skirt.
- Hem the canvas using a machine, disguising it under the fabric.
- The teeth should be flush with the edge of your skirt.
It is very easy to sew a clasp into a seamless skirt. In this case, the following condition must be met: on the lower part of the zipper, in the place where it ends, the seam must be carefully applied.
There are ways to install locks without the use of a sewing machine, that is, by hand.
How to sew into a pleated skirt
Sewing a pleated skirt requires more experience and skill. Sewing a fastener into a skirt fold is a painstaking process, so you should be patient. Only a seamstress who is quite familiar with sewing can do this carefully, without a hitch.
When cutting out products, it is necessary to leave a cut for the fastener in the seam, the length of which should be equal to the length of the lock with an allowance of two centimeters.
- First of all, you need to smooth out the seam allowances.
- Then you need to make a fold of one centimeter.
- At the next stage, remove this fold and bend it again, but only to a different distance equal to 1.3 centimeters.
- Then you need to pin the zipper to the skirt behind the folded fabric: where the fabric lies in 1 layer. The cloves should be positioned close to the fabric, and the cloves should be 2 centimeters away from the top of the product.
- Next, you need to mark a seam along the zipper and stitch it between this seam and the teeth. The second side should be pinned 1 centimeter from the fold of the fabric.
- And finally, baste the fastener, then stitch it so that the seam is close to the teeth (at a distance of two or three millimeters).
- Remove excess threads and stitch across the seam to secure the hidden fastener at the bottom.
Try sewing such a zipper on an old product; if you can’t do it the first time, practice and you will succeed.
How to sew a metal zipper into a skirt
Zippers made of metal, are used not only to perform the function of a fastener, but also to add additional decor to products. In the latter case, zippers are sometimes sewn into the skirt, and sometimes placed on top. The color of the fastener can be contrasting to the main color of the fabric or matched to it. Beginner dressmakers are advised to choose a zipper color in the same shade as the skirt and sew it in from the inside out.
Before installation, you must first baste the fastener onto the product, as when working with a regular plastic zipper. The main condition: the teeth must be visible from the face, so you need to step back about five millimeters from the edge of the fabric.
Nuances when working with knitwear
When working with knitwear, the fastener installation technology is the same, but requires a little preparatory work:
- purchasing a special needle for sewing knitwear with a rounded end;
- selection of step length on a small piece of fabric;
- stitch check;
- gluing with non-woven or dublerin padding.
