Shoulder straps for officers of the airborne troops. Shoulder straps and ranks in the Russian army

In the Armed Forces Russian Federation Two types of ranks have been established for persons undergoing military service - military and naval. In ancient Rus', the presence of insignia and certain military units formed on a permanent basis was completely excluded. The division of the then pitiful semblance of a standing army into separate formations took place in accordance with the number of soldiers who were in one or another formation. The principle was as follows: ten warriors - a unit called the “ten”, led by the “ten”. Then everything is in the same spirit.

The history of the emergence of military ranks in Russia

Under Ivan the Terrible, and later under Tsar Mikhail Fedorovich, this system underwent some changes: Streltsy hundreds appeared, and military ranks appeared in them. At that time, the hierarchy of ranks was the following list:

• Sagittarius
• foreman
• Pentecostal
• centurion
• head

Of course, between all the above ranks and the ranks that currently exist, the following analogy can be drawn: a foreman is a warrior, in our time performing the duties of a sergeant, or a foreman, a pentecostal is a lieutenant, and a centurion, respectively, is a captain.

After some time, already during the reign of Peter the Great, the hierarchical system of ranks was again transformed to the following:

• soldier
• corporal
• ensign
• lieutenant, called lieutenant
• captain (captain)
• quartermaster
• major
• lieutenant colonel
• Colonel

The year 1654 became outstanding in the history of the formation of military ranks in Russia. It was then that for the first time in the history of Russia the rank of general was awarded. Its first owner was Alexander Ulyanovich Leslie, the leader of the operation to capture and liberate Smolensk.

Categories of military ranks in the Russian Army

One of the largest political events of the 20th century that occurred in Russia, namely the October Revolution of 1917, became the last stage towards the formation of an established system of military ranks, which has not undergone any changes for a whole century.

Military ranks

1. Private. One of the first, considered the lowest military rank of the Russian Armed Forces.
2. Corporal. A rank that is awarded to military personnel who are part of the armed forces of the Russian Federation for any military distinction.

1. Major.
2. Lieutenant colonel.
3. Colonel.

Ship ranks

Ship ranks can simply be listed in order of seniority (lowest to highest) due to their full correspondence with the land equivalent:

1. Sailor, senior sailor.
   
2. Foreman 2 (second) article, foreman 1 (first) article, chief foreman, chief ship's foreman - representatives of a group of military personnel classified as sergeants and foremen.
   
   
3. Midshipman, senior midshipman - military personnel of the group of warrant officers and midshipmen.
   
4. Junior lieutenant, lieutenant, senior lieutenant, captain-lieutenant - a group of military personnel representing junior officers.
   
   
5. Captain 3 (third) rank, captain 2 (second) rank, captain 1 (first) rank - representatives of senior officers.
   
   
6. Rear admiral, vice admiral, admiral, and fleet admiral are representatives of senior officers, respectively.
   

As with military ranks, the highest military rank for the navy is Marshal of the Russian Federation.

What is very noteworthy is that naval and military military ranks are also assigned to the following formations: the security forces of the Russian Federation - the Ministry of Emergency Situations, the Ministry of Internal Affairs, etc., as well as water border formations that ensure security near coastal borders.

Colors and types of shoulder straps

Now let's turn to the shoulder straps. With them, unlike ranks, things are somewhat more complicated.

Shoulder straps are usually distinguished according to the following series of criteria:

• the color of the shoulder strap itself (different depending on the military structure);
• the order of arrangement of distinctive signs on shoulder straps (also depending on a particular military structure);
• the color of the decals themselves on the shoulder straps (similar to the points above).

There is another important criterion - the form of clothing. Accordingly, the army does not have the widest selection of clothing, which is allowed according to the regulations. More precisely, there are only three of them: everyday uniform, field uniform and dress uniform.

Shoulder straps of non-officers

Let's start with a description of the everyday uniform and the shoulder straps that come with it:

The everyday uniform of non-officers includes shoulder straps with two narrow stripes along the edges of the longitudinal part. Such shoulder straps can be seen on the shoulders of privates, non-commissioned officers, and warrant officers. All these images are presented above in the sections of military and ship ranks.

Officer's shoulder straps

Shoulder straps for the everyday uniform of officers are divided into three more subtypes:

• Shoulder straps for the everyday uniform of junior officers: have only one stripe running down the center along the shoulder strap itself.
• Shoulder straps for the everyday uniform of senior officers: they have two longitudinal stripes, also located in the center.
• Shoulder straps for the everyday uniform of senior officers: they differ sharply from each of the previous types in that they have a special fabric relief over the entire area of ​​the shoulder strap. The edges are framed by one narrow strip. A distinctive sign is also the stars that follow strictly in one row.
• It is impossible not to include in a separate group the Marshal of the Russian Federation and the type of shoulder straps corresponding to his everyday uniform: they also have a special fabric relief, which was mentioned in the paragraph above, but are fundamentally different in color. If the shoulder straps in each of the previous paragraphs were a rectangle of dark green color, then these same ones are distinguished by their immediately striking golden color, which is quite consistent with the high-profile title of their wearer.

An interesting fact is that on February 22, 2013, the President of the Russian Federation Vladimir Putin signed a decree that on the shoulder straps of army generals and admirals of the Russian Navy there will be one star with a diameter of 40 mm instead of 4 stars in one line as before. The corresponding image is presented above.

• Non-officer field uniform: shoulder straps are a regular rectangle, camouflaged as a summer taiga with a transverse (or longitudinal) stripe.
• Field uniform for junior officers: stars of relatively small size serve as a distinctive sign.
• Field uniform of senior officers: major, lieutenant colonel have one and two large stars on their shoulder straps, respectively, colonel - three.
• Field uniform of senior officers: all persons holding ranks in accordance with the previously announced composition have absolutely the same structure (dark green stars, strictly in a row), but shoulder straps different in the number of distinctive insignia. Just like in everyday uniforms, the General of the Army and the Marshal of the Russian Federation are distinguished by large stars

These features can be seen in more detail in the picture:

It was not long before military clothing became comfortable and practical. Initially, her beauty was valued more than the qualities mentioned a little earlier. Fortunately, under Alexander III (the third), it was realized that rich uniforms were too expensive. It was then that practicality and convenience began to be considered the primary value.

In certain periods of time, the soldier's uniform resembled ordinary peasant attire. Even in the conditions of the already existing Red Army, little attention was paid to the fact that there was no unified military uniform. The only distinctive sign of all soldiers was a red bandage on their sleeves and hats.

Even shoulder straps managed to be replaced for some time with ordinary triangles and squares, and only in 1943 were they returned as distinctive signs.

By the way, to this day, military personnel of the Russian Federation wear a uniform that was designed by the well-known fashion designer V. Yudashkin in 2010.

If you have read the entire article and are interested in testing your knowledge, we suggest taking the test -

Senior officers our country is represented by generals who also have their own internal military gradation:

Military ranks and shoulder straps in the Russian naval forces

The obligations and status in the naval forces are similar to those used in the land forces, but the designations for sailors are different.

Junior ranks:

The gradation of ranks in the naval forces is as follows (starting with junior officer ranks):

Average officer naval ranks are divided as follows:

The composition of the highest category is characterized by the following titles:

In any case, a soldier must pass the test of time before he can perform the duties of the highest ranks.

Ask a Question

Read also

In 2014, the Russian army soldier’s combat equipment was replenished with a new accessory. An item with a complex foreign name, a travel bag, entered the army standard along with new equipment. From the handbag to the travel bag Travel bag translated from French means necessary. This is what in the West they call a small travel case that has several compartments for storing toiletries. The thing is very convenient and necessary, especially in hiking conditions. Story

810 Separate Marine Brigade of the Black Sea Fleet of the Russian Federation Corner on the beret of the Navy of the Russian Federation. Plastizoid Corner on the beret of the Navy of the Russian Federation. Plastizoid. Black background. St. Andrew's flag. Corner on the beret of the Navy of the Russian Federation. Plastizoid Corner on the beret of the Navy of the Russian Federation. Plastizoid. Without an eagle with a tricolor and an anchor. Corner on the beret of the Airborne Forces of the Russian Federation from St. George's

Combined arms body armor 6B-12-1 of the Armed Forces of the Russian Federation Manufacturer CJSC ARMAKOM Body armor 6B33 of the Russian Armed Forces Body armor 6B33 of the Russian Armed Forces Combined arms body armor 6B11-3 of the Russian Armed Forces Combined arms body armor 6B11-3 of the Russian Armed Forces 6B-3 TM combined arms body armor of the Russian Armed Forces Federation Combined arms body armor

Patch insignia of the 6th State Central Research Site of the Russian Armed Forces 6th State Central Test Site Moscow Region, unit 77510, Novaya Zemlya Nuclear archipelago Novaya Zemlya In September 2014, the Central Test Site of the Russian Federation celebrated its 60th anniversary Adopted in the USSR in 1945, a ten-year post-war the shipbuilding program, naturally, could not take into account the possibility of using nuclear weapons in the fight at sea; they simply did not exist then.

Patch of the Novosibirsk Combined Arms Military Command School of the Armed Forces of Russia Patch of the Military University of the Ministry of Defense VUMO of the Russian Federation. Moscow Patch of the Military University of the Ministry of Defense VUMO of the Russian Federation. Moscow The sleeve insignia is a red cloth fabric patch in the shape of a red circle with a white edging. In the center of the sign there is an image of a small emblem - a silver column topped

Russian NAVAL SCOUTING Military Metal Badge MOTHERLAND HONOR COURAGE GLORY Russian Navy Metal badge Sea Captain navigator Russian Navy Russian Navy Fleet metal badge with sextant Sea Captain Parameters Width 35mm. Height 45mm. Breastplate for commanders of surface ships Commander of a ship of the Russian Navy Breastplate for commanders of surface ships Commander of a ship of the Russian Navy Breastplate

Chevron of the Arctic border detachment of the FPS FSB of Russia chevron of the Border Troops of the Republic of Dagestan of the Russian Federation chevron of special forces units of the FPS FSB of Russia chevron of the 1st mobile action department of the FPS FSB of Russia chevron of the motorized maneuver group of the FPS FSB of Russia chevron of the special unit Sigma of the Federal Border Service of the Russian Federation Special force of Frontier Guard

Chevron of the counter-sniper unit of the Special Purpose Directorate of the Security Service of the President of the Federal Security Service of the Russian Federation chevron of the Special Communications and Information Service under the FSO of Russia Special Communications of the FSO of Russia Patch of the State Complex Zavidovo FSO of Russia Patch of the State Complex Zavidovo FSO of Russia Patch of the Security Service in the North-West

Combat divers detachment Patch of the 70th separate security platoon of the Russian Black Sea Fleet Patch of the security company of the headquarters of the Black Sea Navy of Russia Patch of the Naval Aviation of the Black Sea Navy of Russia Patch of the Special Communications Service of the Black Sea Navy of the Russian Federation Patch of the Special Service communications of the Red Banner Black Sea Navy 8th Main Directorate of the General Staff

Badge Senior Border Detachment of the Federal Border Guard Service of Russia Badge Senior Border Detachment of the Federal Border Guard Service of Russia Badge Badge Excellent Border Service 1st Degree FBS of Russia Badge Excellent Border Service 1st Degree FPS of Russia Badge Excellent Border Service 2nd Degree FBS of Russia Badge Excellent Border Service 2nd Degree Federal Border Guard Service of Russia Breastplate of the Federal Border Service of the Russian Federation Breastplate

Qualification badge The highest category for military personnel of medical and pharmaceutical specialties of the Armed Forces of the Russian Federation Qualification badge The highest category for military personnel of medical and pharmaceutical specialties of the Armed Forces of the Russian Federation Qualification badge of military medics. The highest category badge is made of metal with enamel golden color, in the form of a stylized

Cockade of foremen, sergeants, soldiers and cadets of the Federal Border Guard Service of Russia 2 Cockade of foremen, sergeants, soldiers and cadets of the Federal Border Guard Service of Russia 2 Manufacturing material metal. Officer's badge of the Federal Border Service of the Federal Border Guard Service of the Russian Federation Officer's badge of the Federal Border Service of the Federal Border Guard Service of the Russian Federation The badge is made of plastic and is attached to the headdress with a plastic screw. Manufacturer Enterprise Victor

Cockade for a field uniform, embroidered by the Russian Armed Forces. Combined arms cockade, embroidered by the Russian Armed Forces. The combined arms cockade is presented in the form of an ellipse measuring 22 mm x 30 mm, framed by a 5 mm wide edging, consisting of 32 pointed rays. Regulatory act order of the Ministry of Defense of the Russian Federation 1500 dated 09/03/11, which made some adjustments regarding symbols and insignia, now sewn on headdresses of military personnel are provided

Badge of a class specialist The best specialist of the Federal Border Guard Service of the Russian Federation Badge of a class specialist The best specialist of the Federal Border Service of the Russian Federation DESCRIPTION of the badge for class specialists, soldiers, sailors, sergeants foremen and the badge Best Specialist Badge for class specialists, soldiers, sailors, sergeants foremen and the badge Best the specialist is hereinafter referred to as

Cockade framed by a wreath of gimp Admirals of the Russian Navy Cockade nut on the cap of officers and enlisted personnel of the Russian Navy Cockade nut on the cap of officer and enlisted personnel of the Russian Navy field Cockade of admirals framed by embroidery of gimp of the Russian Navy Cockade of admirals framed by embroidery of gimp Russian Navy

Summer field uniform of officers for regions with a hot climate of the Russian Armed Forces Summer field uniform of officers for regions with a hot climate of the Russian Armed Forces Summer field uniform of enlisted personnel for regions with a hot climate of the Russian Armed Forces Summer field uniform of enlisted personnel for regions with a hot climate of the Russian Armed Forces The development of this form was carried out long ago as part of the re-equipment and modernization reform Russian army. This version of the form was delivered in 2011.

Badge for 100 trips to guard the border. Badge, awarded after 100 trips to protect the border. The counting is carried out by the secretary on the basis of the exit record sheet. The sheet, most often, is located right at the outpost and is filled out by military personnel independently. In addition to the sign for 100 exits to guard the border, there are similar awards for 300 and 500 exits. The sign is on open sale, specialized online stores chelznak.ru, knagrade.ru, etc. allow you to order

Sleeve insignia of the 3rd brigade of border patrol ships. Kaliningrad group of troops of the Federal Guard Service of Russia. Baltiysk Sleeve insignia of the 3rd brigade of border patrol ships. Kaliningrad group of troops of the Federal Guard Service of Russia. Baltiysk Gold Admiralty anchor is covered with a scarlet cut-out shield with a silver-lined lowered double azure belt, topped with a silver sturgeon with a gold crown on the head and accompanied below by a silver five-pointed star. Floating in a scarlet shield on an azure

Badge of military divers of the Russian Navy Badge of military divers of the Russian Navy Badge of the 269th battalion of combat swimmers of the Russian Navy Badge of the 269th battalion of combat swimmers of the Russian Navy Badge Duty diver of the Russian Navy Badge Duty diver of the Russian Navy Badge of the 269th battalion Navy combat swimmers

Sign of the 574th MPAP Sign of the 574th MPAP Parameters Width 45mm. Height 35mm. Weight 40g. Badge of the 182nd Sevastopol-Berlin Heavy Bomber Aviation Regiment Badge of the 182nd Sevastopol-Berlin Heavy Bomber Aviation Regiment Parameters Width 50mm. Height 59mm. Weight 50g. Badge of the Oryol Regiment of Refueling Aircraft. Badge of the Oryol Regiment of Refueling Aircraft. Parameters Width 45mm. Height 45mm. Weight 40g.

Sign 50 exits for border protection of the Russian Border Service Sign 50 exits for border protection of the Russian Border Service Sign 100 exits for border protection of the Russian Border Service Sign 100 exits for border protection of the Russian Border Service Sign 200 exits for border protection of the Federal Border Service of Russia Sign 200 exits for border protection of the Federal Border Service of Russia Sign 300 exits to border protection

Badge of the PSKR Vladivostok detachment of naval units of the Federal Border Guard Service of Russia Badge of the PSKR Vladivostok naval unit detachment of the Federal Border Guard Service of Russia Badge of the border control detachment OTRK Baikal FPS of Russia Badge of the border control detachment OTRK Baikal FPS of Russia Badge of the Border Guard Boat Division of the FPS of Russia Badge of the Border Control Boat Division of the FPS of Russia

Badge of the Submarine Fleet of the Russian Navy Badge of the Submarine Fleet of the Russian Navy Badge of 45 years of the submarine PL 182 of the Russian Navy Badge of 45 years of the submarine PL 182 of the Russian Navy Badge of K-480 Ak Bars of the Russian Navy Badge of K-480 Ak Bars of the Russian Navy

Badge of a cadet of the Suvorov Military School of the Armed Forces of Russia Badge of a cadet of the Suvorov Military School of the Armed Forces of Russia Manufacturing material brass, nickel silver Mounting method screw twist Parameters Weight 10g. Badge of a cadet of the Nakhimov Naval School of the Russian Armed Forces Badge of a cadet of the Nakhimov Naval School of the Russian Armed Forces Made of brass, nickel silver

Badge Honorary Professor of the Academy of the Federal Border Guard Service of the Russian Federation Badge Honorary Professor of the Academy of the Federal Border Guard Service of the Russian Federation The badge is a golden image of an eagle from the State Emblem of the Russian Federation, framed by a golden laurel-oak wreath, fastened with a bow at the bottom. On the chest of the eagle there is an image of the emblem of the Academy of the Federal Border Guard Service of the Russian Federation. At the bottom of the sign, on a white enamel cartouche, there is a gold inscription in two rows: HONORARY PROFESSOR

31st Airborne brigade new type 171st Signal brigade obsolute 39th Separate airborne brigade 36th Separate airborne brigade 11th Separate Air assault brigade Separate airborne brigade 21st Separate airborne brigade chevron of the 83rd separate airborne brigade of the Russian Airborne Forces, Ussuriysk chevron of the 83rd separate airborne brigade airborne brigade of the Russian Airborne Forces, Ussuriysk, chevron of the 31st Guards

Chevron of a special unit of combat divers of the Black Sea Fleet of the Russian Navy; chevron of a special unit of combat swimmers of the Black Sea Fleet of the Russian Navy. combating underwater sabotage forces

76th Air assault division 76th Air Assault division 7th Air Assault division Mountain 7th Airborne division obsolute 104th Airborne division obsolute Chevron of the 106th Guards Airborne Division of the Russian Airborne Forces chevron of the 76th Guards Chernigov Red Banner Airborne Assault Division of the Russian Airborne Forces Pskov chevron 76 1st Guards Chernigov Red Banner

General sleeve insignia of the Red Banner Caspian Flotilla of the Russian Navy. Sleeve insignia of the missile ship Tatarstan of the Red Banner Caspian Flotilla of the Russian Navy. Patch insignia of the missile ship 2nd rank of project 11661K Tatarstan of the Red Banner Caspian Flotilla of the Russian Navy http www.eurasian-defence.ru node 30146

Patch of the Military Mobilization Directorate of the FSO of Russia Patch of the Military Mobilization Directorate of the FSO of Russia Patch of the Legal Support Service of the FSO of Russia Patch of the Legal Support Service of the FSO of Russia Patch of the Personnel Directorate of the FSO of Russia Patch of the Personnel Directorate of the FSO of Russia Patch of the Deputy Director of the FSO of Russia Patch deputy

Patch of the central military hospital of the Russian Airborne Forces Paramilitary Cadet corps Paramilitary sport club Airborne support command Paramilitary sport club Airborne force peacekeepers in Kosovo KFOR mission 10th Separate airborne regiment peacekeppers in North Ossetia Airborne troops peacekeepers Airborne Troops in Kosovo Airborne force peacekeepers in Kosovo KFOR mission Airborne battalion UN peacekeepers observers

Sleeve insignia of the Directorate of the Group of Forces of the Federal Border Guard Service of Russia. Kaliningrad Patch of the Directorate of the Group of Forces of the Federal Border Guard Service of Russia. Kaliningrad In the center of the sleeve emblem is a crowned horseman in a gold cut-out shield, holding a gold scepter and a scarlet shield with a silver cross, the founder of Königsberg, the Czech king Otakar II from the Přemyslid dynasty. Behind the shield, two pernachs are crossed obliquely, the traditional weapon of Russian governors. Sleeve insignia of the 95th separate Koenigsberg border detachment

Patch 247 of the Separate Submarine Division of the Black Sea Navy of Russia Patch of the 247 Separate Constance Order of Ushakov Submarine Division of the Sevastopol Naval Base of the Red Banner Black Sea Navy of the Armed Forces of the Russian Federation

Separate company of the Special Force Special forces for collectors 45th Guard Spetsnaz Regiment Patch of the 218th special forces battalion of the Airborne Forces of the Armed Forces of the Russian Defense Ministry Patch of the Separate reconnaissance company of the airborne troops of the armed forces of the Ministry of Defense of the Russian Federation

Chevron of the 45th Separate Guards Order of Kutuzov Order of Alexander Nevsky Special Purpose Regiment of the Airborne Forces of the Russian Armed Forces chevron of the 1st Guards Anti-Aircraft Missile Regiment of the Airborne Forces of the 106th Guards Airborne Division. chevron of the 1182nd Guards Artillery Regiment 106th Airborne Regiment of the Russian Airborne Forces 1141st Artillery regiment of 7th Air Assault division Mountain 51st Airborne regiment of 106th Airborne division

Patch of the representative office of the Federal Border Guard Service of Russia in the Republic of Armenia. Patch patch of the representative office of the Federal Border Guard Service of Russia in the Republic of Armenia. A head beveled in four parts with azure and scarlet, in the golden courtyard of the fortification there is a scarlet equal-ended clover-leaf cross covering an azure obliquely crossed bow and arrow. Sleeve insignia of the representative office of the Federal Border Guard Service of Russia in the Republic of Belarus. Patch of the representative office of the Federal Border Guard Service of Russia in the Republic of Belarus

Chevron of the Presidential Kremlin Regiment of the Service of the Commandant of the Moscow Kremlin of the FSO of the Russian Federation chevron of the Presidential Kremlin Regiment of the Service of the Commandant of the Moscow Kremlin of the FSO of the Russian Federation Moscow Patch of the Presidential Regiment of the FSO of the Russian Federation Patch of the Presidential Regiment of the FSO of the Russian Federation Patch of the Presidential Regiment of the FSO of the Russian Federation Patch of the Presidential Regiment of the FSO of the Russian Federation Patch of the Presidential shelf

Sleeve Badge of the Troops Directorate of the North-Western Border District of the Federal Border Guard Service of Russia. St. Petersburg Sleeve Badge of the Directorate of Troops of the North-Western Border District of the Federal Border Guard Service of Russia. St. Petersburg The sleeve insignia is based on the heraldry of St. Petersburg. In the center is a shield, a scarlet shield, two silver anchors crossed obliquely with earrings downwards, Admiralty and river, covered with upright gold royal scepter historical coat of arms of St. Petersburg. The shield covers two obliquely crossed

Patch insignia of the border detachment of the Conducting Bay of the North-Eastern Border District of the Federal Border Guard Service of Russia. Patch insignia of the North-Eastern Border District of the Federal Border Guard Service of Russia of a separate checkpoint. Magadan. Description of the sleeve insignia The shield, crossed with gold and azure, has a large-toothed top and a wavy black belt at the bottom. The author's version of the heraldic symbol of the permanent location of the checkpoint of the city of Magadan, which does not have its own

Patch of the Office of the Pacific Border District of the Federal Border Guard Service of Russia Patch of the Office of the Pacific Border District of the Regional Directorate of the Federal Border Guard Service of Russia in Vladivostok Patch of the Malokurilsky Border Detachment of the Pacific Border District of the Federal Border Guard Service of Russia

242nd Airborne training center unofficial Ryazan Higher airborne Command School Patch of the Ryazan Airborne Institute, Patch of the Ryazan Airborne Institute, Patch of the 242nd training center Airborne Forces of the Russian Federation Patch insignia of the 242nd training center of the Airborne Forces of the Russian Federation Patch insignia of the 332nd school of warrant officers of the Airborne Forces Patch of the 332nd school of warrant officers of the Airborne Forces

Patch of the research and testing technical center of the Federal Border Guard Service of Russia Patch of the service animal training center of the Federal Border Guard Service of the Russian Federation in Vyazma Patch of the school of cooks of the Federal Border Guard Service of the Russian Federation in Vladimir Patch of the training border detachment of the Federal Border Guard Service of the Russian Federation in Ozersk Patch of the training border detachment of the Federal Border Guard Service of the Russian Federation. Obolensk Patch of the Khabarovsk Border Institute of the Federal Border Guard Service of the Russian Federation Patch of the Kaliningrad Border Institute of the Federal Border Guard Service

Chevron of the Eighth Directorate of the General Staff of the Russian Armed Forces for office uniforms chevron of the 1st communications center of the General Staff of the Russian Armed Forces Ruby chevron of the Central Command Post of the General Staff of the Russian Armed Forces Patch of the apparatus of the Minister of Defense of the Russian Federation Patch of the apparatus of the Minister of Defense of the Russian Federation - fabric patch in the shape of a circle red with silver gray edging. In the center of the sign

Patch of the Police of the Ministry of Internal Affairs of the Chechen Republic of Ichkeria Patch of the UPU of the Chechen Republic of Ichkeria Patch of the MITU of the Chechen Republic of Ichkeria Patch of the IPON Armed Forces of the Chechen Republic of Ichkeria. 2001 IPON sleeve insignia of the Armed Forces of the Chechen Republic of Ichkeria. 2001 IPON - Islamic Special Purpose Regiment. Patch of the Armed Forces of the Chechen Republic of Ichkeria Patch of the special police regiment

Patch of the large anti-submarine ship Kerch of the Black Sea Navy of Russia Patch of the Patrol ship Smetlivy of the Black Sea Navy of Russia Patch of the Patrol ship Inquisitive of the Black Sea Navy of the Russian Patch of the Patrol ship Ladny of the Black Sea Navy of Russia Patch of the large landing box la Yamal Black Sea Navy of Russia

Patch of the military unit 20117 of the Russian Space Forces Patch of the military unit 20117 of the Russian Space Forces Patch 57 ORTU, in unit 16605 of the Russian Space Forces Patch 57 ORTU, in unit 16605 of the Russian Space Forces Normative act Order of the Commander of the Space Forces of the Russian Federation 156 dated 2009 Patch of the 474th Separate Radio Engineering Unit of the Space Forces of the Russian Space Forces Patch of the 474 ORTU

Patch of the 2nd Aerospace Defense Brigade of the Russian Air Force Patch of the 2nd Aerospace Defense Brigade of the Russian Air Force 2nd Aerospace Defense Brigade of the 1st Air Force and Air Defense Command Voronezh Russian Air Force, military unit 10953, Leningrad region, village . Coniferous

Patch of the 11th Aerospace Defense Brigade of the Russian Air Force Patch of the 11th Aerospace Defense Brigade of the Russian Air Force Patch of the 11th Red Banner Aerospace Defense Brigade 3rd Air Force and Air Defense Command. In h 54912, Komsomolsk-on-Amur, Khabarovsk Territory, Russia.

Marine unit 199th Mobile missile battalion of the Coast defense of the Pacific Fleet 879th Air assault bn of the 336th Marine brigade of the Baltic Fleet Naval infantry department of St. Petersburg High Command Military school Separate air assault battalion of marines of Pacific Fleet Air assault company of 1st separate marine battalion of 61st Marine bde of the Northern Fleet Marine unit Marine unit Patch of the 155th Marine Brigade

The sleeve insignia of the Strategic Missile Forces of the Russian Armed Forces The sleeve insignia of the Strategic Missile Forces of the Russian Armed Forces The sleeve insignia of the Strategic Missile Forces of the Armed Forces of the Russian Federation is a fabric patch on a cloth base in the shape of a blue circle with a red edging. In the center of the sign is the image of the middle emblem of the Strategic Missile Forces. Medium emblem of the Strategic Missile Forces

Patch of the nuclear submarine Wolf of the Russian Northern Fleet K-461 Wolf nuclear submarine of project 971, based at Gadzhievo. The Gadzhievo base is located in Saida Guba, ZATO Skalisty, Murmansk region. Nuclear submarines of the Northern Fleet are based in Gadzhiev. The base includes berths in the city of Gadzhievo, Yagelnaya Guba and in the village of Olenya Guba, Olenya Guba. Patch of the Northern Fleet of the Russian Navy

Patch of the director of the Federal Border Service of Russia Patch of the director of the Federal Border Service of Russia Description of the sleeve patch of the director of the Federal Border Service of Russia Shield with a border in the form of a gold cord. The field of the shield is made up of a straight emerald cross extended towards the ends and the corners between the ends of the cross in the colors of the State Flag of the Russian Federation. In the center of the cross is a crowned golden double-headed eagle with a Moscow shield on the chest, the emblem of the Federal Border Guard Service of Russia. Eagle superimposed on

Chevron of the Russian Airborne Forces Command for a jacket. Airborne Troops Airborne Force Airborne force for collectors Airborne Troops Airborne Troops Airborne Troops Airborne Troops Airborne Troops Patch of the Commander of the Airborne Forces of the Airborne Forces of the Russian Armed Forces Patch of the Commander of the Airborne Troops of the Airborne Forces of the Russian Armed Forces Patch

Patch of the PS FSB of the Russian Federation since 2003 for field uniforms Patch of the PS FSB of the Russian Federation since 2003 Patch of the PS of the Russian Federation from 1994 to 2003 - Border Aviation Patch of the PS of the Russian Federation from 1994 to 2003 - Coast Guard Border Service Patch of the FBS of the Russian Federation Patch badge of the Federal Border Guard Service of the Russian Federation from 1994 to 2003 Patch of the Federal Border Guard Service of the Russian Federation sleeve badge of the Federal Border Guard Service of the Russian Federation General sleeve badge of the Border Troops of the Russian Federation Chevron

Special purpose unit of the FSB of the Russian Federation Special purpose unit of the FSB of the Russian Federation Special forces of the FSB of the Russian Federation West, Kaliningrad Special purpose unit of the FSB of the Russian Federation West, Kaliningrad city. Special forces of the FSB of the Russian Federation West, Kaliningrad Special forces unit of the FSB of the Russian Federation West, Kaliningrad. Patch of the ALPHA group anti-terrorism ALPHA Group

Summer admiral's or general's cap of the Russian Navy. The top of the cap is made of firewood, the piping is made of white cloth. Dress cap of the Navy of the Russian Federation Keak - headdress of the dress uniform of the presidential regiment of the FSO of Russia Keak - headdress of the dress uniform of the presidential regiment of the FSO of Russia Soldier's ceremonial cap of the Commandant's Regiment of the Armed Forces

Casual summer uniform of a cadet of the Russian Navy Casual summer uniform of a cadet of the Russian Navy Image source http recrut.mil.ru Casual summer uniform of a cadet of the Russian Navy Casual summer uniform of a cadet of the Russian Navy Image source http recrut.mil.ru Casual uniform of a sailor, cadet of the Russian Navy Casual uniform of a sailor , cadet of the Russian Navy

Officer's cap of the FSB of the Russian Federation Officer's cap of the FSB of the Russian Federation Officer's cap of the Air Force of the Russian Federation Officer's cap with embroidery of the Armed Forces of the Russian Federation Officer's cap with a metal emblem on the crown of the Armed Forces of the Russian Federation Officer's cap with a metal emblem on the crown of the Armed Forces of the Russian Federation Officer's cap of the Armed Forces of the Russian Federation Federation

Shoulder strap of a private of the Air Force of the Armed Forces of Russia Shoulder strap of a private of the Air Force of the Armed Forces of Russia Shoulder strap of a corporal of the Air Force of the Armed Forces of Russia Shoulder strap of a corporal of the Air Force of the Armed Forces of Russia Shoulder strap of a sergeant of the Air Force of the Armed Forces of Russia Shoulder strap of a sergeant of the Air Force forces of the Armed Forces of Russia Shoulder straps of a senior sergeant of the Air Force of the Armed Forces of Russia Shoulder straps of a senior sergeant of the Air Force

A private's shoulder strap for a field uniform of the Russian Armed Forces A private's shoulder strap for a field uniform of the Russian Armed Forces A corporal's shoulder strap for a field uniform of the Russian Armed Forces A corporal's shoulder strap for a field uniform of the Russian Armed Forces A junior sergeant's shoulder strap for a field uniform of the Russian Armed Forces A junior sergeant's shoulder strap for field uniform of the Russian Armed Forces Sergeant's shoulder straps for field uniform of the Russian Armed Forces

Senior sergeant's shoulder straps for the digital field uniform of the Russian Armed Forces Senior sergeant's shoulder straps for the digital field uniform of the Russian Armed Forces Sergeant's shoulder straps for the digital field uniform of the Russian Armed Forces Sergeant's shoulder straps for the digital field uniform of the Russian Armed Forces Corporal's shoulder straps for the digital field uniform of the Armed Forces Russian forces Corporal shoulder straps for digital field uniforms of the Russian Armed Forces Foreman's shoulder straps

Shoulder strap of a private of the Armed Forces of Russia Shoulder strap of a private of the Armed Forces of Russia Shoulder strap of a corporal of the Armed Forces of Russia Shoulder strap of a corporal of the Armed Forces of Russia Shoulder strap of a junior sergeant of the Armed Forces of Russia Shoulder strap of a junior sergeant of the Armed Forces of Russia Shoulder strap of a sergeant of the Armed Forces of Russia Shoulder strap of a sergeant of the Armed Forces of Russia Shoulder strap of a senior sergeant of the Armed Forces of Russia Shoulder strap of a senior Sergeant of the Armed Forces of Russia Shoulder straps of the foreman of the Armed Forces

Digital camouflage suit Fabric name KMF Lego or Digit Winter combined arms field uniform Digital camouflage of the Armed Forces of the Russian Federation Winter combined arms field uniform Digital camouflage of the Armed Forces of the Russian Federation Field digital camouflage uniform of the Armed Forces of the Russian Federation Field digital camouflage uniform of the Armed Forces of the Russian Federation Image source

Camouflage cap Flora of the Armed Forces of the Russian Federation Camouflage field cap of the Armed Forces of the Russian Federation Camouflage field cap of the Armed Forces of the Russian Federation. Fabric name KMF Lego or Figure Summer field camouflage cap with ears of the Russian Armed Forces Summer cap, digital camouflage of the Russian Armed Forces Summer cap, digital camouflage of the Russian Armed Forces

Summer casual uniform for generals of the Russian Armed Forces Summer casual uniform for generals of the Russian Armed Forces Sources kp.ru, delfi.ua Summer casual uniform for women officers of the Russian Ground Forces Summer casual uniform for women officers of the Russian Ground Forces Casual summer uniform for women military personnel of the Russian Armed Forces Casual summer uniform for female military personnel of the Russian Armed Forces

Universal Tactical Vest 6SH-112 Russian Armed Forces Unloading vest PS-ZhR Border Service of the Federal Security Service of Russia Set of field equipment SMERSH SSO Russia Universal transport vest 6Sh-92-2 Russian Armed Forces Universal transport vest 6Sh-92-2 Russian Armed Forces Unloading vest explosives equipment FSB RF Unloading vest

Airborne backpack RD-54 Flora of the Russian Armed Forces Airborne backpack RD-54 Flora of the Russian Armed Forces The paratrooper's backpack RD-54 is designed to accommodate and carry combat equipment that a paratrooper takes with him when landing behind enemy lines. The backpack is conveniently placed on the parachutist both during the jump and in combat conditions after landing. ORDER OF PACKING FOOD RATION, B P, BB, SV, OTHER MATERIALS IN RD-54 BACKPACK AND CARE

Bowler-flask, combined set of Airborne Forces Bowler-flask, combined set of Airborne Forces This set was developed in the USSR and was used in the airborne forces, as well as by Soviet troops in Afghanistan. A very successful design solution for the set. The set is maximally functional and easy to use. All components of the pot-flask are made of a special aluminum alloy in accordance with the specifications of the Ministry of Defense. The aluminum alloy used has passed all

Patch of the Syzran Military Aviation Institute VVAUL VI Flight School in the city of Syzran, Samara Region. Since the mid-20th century, it has been the leading domestic educational institution in the field of training pilots for military aviation helicopters. Sleeve insignia of the Military Engineering and Technical University of the Russian Ministry of Defense

Protective helmet P7 6B7 of the Russian Armed Forces 1 Protective helmet P7 6B7 of the Russian Armed Forces 1 Protective helmet P7 6B7 of the Russian Armed Forces 2 Protective fabric-polymer helmet P7 6B7 of the Russian Armed Forces Combined arms helmet, first generation. It is made of a composite based on a combination of aramid fabrics and a film polymer binder. The helmet is the first production example made from an alternative

Eagle on the crown of the cap of the Russian Armed Forces Eagle on the crown of the cap of the Russian Armed Forces. Plastic. Plastic twist Parameters Width 67mm. Height 42mm. Eagle on the crown of the cap of the Russian Armed Forces Eagle on the crown of the cap of the Russian Armed Forces. Light metal. Antennae on two fastenings. Eagle Coat of arms on the crown of the cap of the Armed Forces of the Russian Federation Eagle on the crown of the cap of the Armed Forces of the Russian Federation. Heavy metal. Spin

Barmitsa is a basic set of Russian combat equipment of the first generation, created for motorized rifle and airborne troops, as well as special forces units. Developed by the team of the Klimov enterprise TsNIITochMash in the period from 1999 to 2005 as part of the Fighter-XXI program of the General Staff. In addition to TsNIITochMash, more than 20 enterprises took part in the development of Barmits equipment, including the Sozvezdie and Izhmash concerns, OJSC Cyclone, etc. The set consists of a field uniform, equipment

The Permyachk combat protective kit, developed by Kirasa CJSC and chief designer Sergei Pletnev, is an integral part of a serviceman’s individual combat equipment. It includes means for placing and transporting weapons and ammunition, camouflage means and a number of other special elements that allow the fighter to efficiently perform assigned tasks. The general customer of the Permyachk BZK is the Main Missile and Artillery Directorate of the GRAU of the Ministry of Defense

In modern combat conditions, a soldier is exposed to various risks, due to which he may lose the opportunity to continue combat work, be injured or die. As a result, a fighter needs protective equipment that can reduce or completely eliminate existing risks. Over the decades, various protective equipment have been created to improve the safety of soldiers. IN last years proposals also appeared to create full-fledged protective complexes. In our country this is the direction

For military service at all times, there was a certain set of laws aimed at increasing efficiency in combat operations, guard duty, as well as order in interpersonal relationships. This set of laws is combined into a charter, which is the main legislative document for a soldier. But since all issues of military service cannot be concentrated in a common document, there is a division of regulations by type. In particular, in the modern army there are two of them:

The word camouflage translated from French means camouflage - it is a spotted or pixelated camouflage color used to reduce the visibility of people's clothing, equipment, weapons and other objects in the environment by blurring and breaking the silhouette of an object or person. Camouflage is intended and used for making it difficult for the enemy to recognize the outlines of a person or equipment on the ground when using visual, photo, or optoelectronic

The All-Season Set of Basic Uniforms VKBO or as it is now correctly called the All-Season Set of Field Uniforms VKPO is a new-style uniform for military personnel consisting of 8 layers of clothing. Modern materials and advanced technologies operate in a wide temperature range under different weather conditions. Main feature The great thing about the new military field uniform is that it is multi-layered. This approach was first used in Russia for field uniforms

History of military uniforms air force The Russian Federation has its roots in Tsarist Russia. Over the century of its existence, the form has changed many times beyond recognition. The main historical milestones in the formation of modern Air Force uniforms are as follows: 1910, formation of the Air Force of the Russian Empire, 1918, creation of the Air Force of the USSR, 1939-1945. Great Patriotic War 1980s Cold War

Uniforms of cadets, soldiers, sailors Let's start our review with the military uniform for cadets, as well as ordinary personnel of the Army, Air Force and Navy. This uniform is comfortable and practical, just what the 21st century army needs. Let's see what it looks like, learn more about it So, military uniform photo Casual uniform of cadets, soldiers and sailors Summer casual uniform includes a camouflage suit, a camouflage T-shirt, a field

In this article you will see the new military uniform of the Russian Federation. All pictures and descriptions correspond to Order 300 of June 22, 2015 On the approval of the Rules for wearing military uniforms, insignia, departmental insignia and other heraldic symbols in the Armed Forces of the Russian Federation and the Procedure for mixing items of existing and new military uniforms in the Armed Forces of the Russian Federation . Uniforms of the SV, Air Force and Airborne Forces The new uniform is convenient and practical,

Military uniform, military uniform, uniform of the Armed Forces of the Russian Federation, specific items of uniform and equipment of military personnel of the Armed Forces of the Russian Federation, as well as the rules for wearing them since the early 90s. XX century to the present time, established by the highest government bodies for the personnel of the RF Armed Forces. Traditionally, it is divided into ceremonial, everyday and field, and each of them, in addition, into summer and winter.

Military rank in the modern army is a complex hierarchical relationship between military personnel, enshrined in law and military regulations. A certain rank must be assigned to absolutely any military serviceman, regardless of his education, type of activity or length of service. Even a young man who was drafted into the ranks of the RF Armed Forces is listed as a private. This gradation makes it possible to distribute the rights and responsibilities of the entire contingent to ensure controllability in the case of real

As in any structure, there is a certain hierarchy in the Russian army. IN in this case the pyramid represents military positions and their corresponding army ranks. At the same time, shoulder straps are provided as distinctive signs on the uniform of military personnel. Today we’ll talk about what military ranks are present in the Russian army, what are their main differences, how the stars are located on the shoulder straps and how many years to serve before becoming a colonel. Types, classification of ranks

Sailor Senior Sailor Petty Officer 2 articles Petty Officer 1 article Chief Petty Officer Chief Petty Officer Junior Lieutenant Lieutenant Senior Lieutenant Lieutenant Commander Captain 3rd rank Captain 2nd rank Captain 1st rank Rear Admiral Vice Admiral

In the Russian Federation, there are two types of military ranks for military personnel: military and naval. Ship military ranks are assigned to sailors of the surface and submarine forces of the Navy, the coast guard of the Border Service of the FSB of Russia. Military ranks are assigned to other military personnel serving in the Armed Forces of the Russian Federation, the Ministry of Emergency Situations of Russia, the Ministry of Internal Affairs of Russia, the FSB of Russia, the SVR of Russia, the FSO

Combat equipment of a soldier Ratnik is one of the most large-scale projects modernization of the Russian army. As applied to this program, the concept of equipment is so broad and extensive that all its elements are almost impossible to describe in one article or depict in one photograph. The commander's personal computer is protected from shock, dust and water. It is equipped with a resistive screen that is insensitive to moisture and a blued steel stylus. The commander can track

VKBO absolutely the new kind uniforms, created on the principle of multi-layering. All elements, in accordance with heat-protective properties, are divided into a multi-level system for use at temperatures from -40 C to 15 C and a summer suit temperature range from 15 C to 40 C. The multi-layer system includes 8 levels of clothing that can be combined depending on the intensity of physical activity military personnel and weather conditions. Summer suit consists

Coats of arms and emblems of the Armed Forces of the Russian Federation and rules for the design of sleeve insignia Small Medium Large Date of approval of the emblem Formation 01/27/1997 Armed forces Russian Federation 07/21/2003 Ministry of Defense of the Russian Federation 03/19/2005 Office of the Ministry of Defense

Many conscripts want to go through the school of life, realizing that this is simply necessary. Recently, the popularity of military craft has increased significantly. Reforms in the army have significantly affected the comfort of serving. Despite this, almost all parts honor the customs and traditions inherited from older generations. This is especially true when completing a service. The end of any school is associated with certain experiences, and the end of the school of life is the moment to which a guy

Oleg Volkov, senior reserve lieutenant, former commander of the T-55 tank, gunner of the 1st class gun. We have been waiting for her for so long. Three long years. They waited from the very minute they exchanged their civilian clothes for soldier's uniforms. All this time she came to us in our dreams, during breaks between exercises, shooting at firing ranges, studying materiel, outfits, drill training and other numerous army duties. We are Russians, Tatars, Bashkirs, Uzbeks, Moldovans, Ukrainians,

To achieve maximum efficiency in the military activities of the army, it is necessary to develop a set of rules that would cover all areas, allowing each soldier to determine his rights and powers in each specific situation. This understanding was reached even under Peter I; it is not for nothing that he is considered the founder of the introduction of military regulations. Although, in fairness, it should be noted that the history of military regulations in tsarist Russia goes back to the 16th century, when, by order of Ivan the Terrible, the Boyar verdict was adopted

Camouflage ZDU EMR. ZDU camouflage Full protection Also EMP Uniform Masking Color Also Russian number - camouflage used in the army of the Russian Federation since 2002. Sample of a new uniform kit. Summer set Seasonal options Color 2979-8, Dark winter on the left, light summer Both produced by Tchaikovsky textiles, i.e. difference

Since May 23, 1994, in connection with the decree of the Commander-in-Chief of the Russian Federation, wearing insignia left over from the Soviet army was considered illegal. From that moment on, Russia began to form its own system of national symbols in relation to insignia in the RF Armed Forces. History of the appearance of insignia Starting from the 16th-17th centuries, in the Streltsy troops, the commander differed from the ordinary in the cut of his uniform, a different type of weapon and a cane along which

Insignia in the Russian Armed Forces are divided into lapel and sleeve insignia by formation. Lapel insignia A buttonhole with the emblem of the Air Force of the USSR Armed Forces on an overcoat, sewn in 1958. A lapel insignia is an emblem, incorrect buttonholes or buttonholes are paired emblems located in the upper part of the buttonholes. Military personnel wear lapel insignia of the emblem according to the branch of service to which the specialty of the given serviceman belongs, in contrast to the buttonhole,

Ensigns, sergeants, cadets and soldiers Legally, the Russian Armed Forces have existed since May 7, 1992, Russian Presidential Decree 466. Also legally, the Soviet Army ceased to exist on December 25, 1991, when the Belovezh Agreement on the liquidation of the USSR came into force. In fact, the Soviet Army began to disintegrate in the fall of 1989, when the former Soviet republics of the USSR, one after another, began to declare their state sovereignty and that all military property

As in Soviet times, there are now curved stripes and stars on shoulder straps, but the meanings remain the same. So let's start with the lowest ranks. Clean shoulder straps - private. One stripe - corporal. Two stripes - junior sergeant. Three stripes Sgt. Three stripes together Staff Sgt. One wide strip along the shoulder strap of a petty officer, and for sailors a midshipman

OPERATING INSTRUCTIONS FOR PRODUCTS All-season set of basic uniform VKBO 1. Introduction Carefully read these instructions before putting VKBO into operation. 2. List of products 2.1. Headwear 2.1.1. Summer azhka 2.1.2. Insulated hat with earflaps 2.1.3. Balaclava mask hat 2.2. Linen 2.2.1. Moisture-wicking lightweight underwear, short T-shirt and briefs

Continuity and innovation in modern military heraldry The first official military heraldic sign is the emblem of the Armed Forces of the Russian Federation established on January 27, 1997 by Decree of the President of the Russian Federation in the form of a golden double-headed eagle with outstretched wings holding a sword in its paws, as the most common symbol of the armed defense of the Fatherland, and a wreath is a symbol of the special importance, significance and honor of military labor. This emblem was established to indicate ownership

In Russian literature, there is a deeply erroneous opinion that shoulder straps as an element of a military uniform supposedly originate from mythical metal shoulder pads that protected a warrior’s shoulders from saber strikes. However, this is just a beautiful legend that does not have any serious basis. Shoulder straps, and one appeared on Russian military clothing only with the creation of a regular army by Tsar Peter I between 1683 and 1699 as a purely practical element of clothing.

Considering all the stages of the creation of the Russian armed forces, it is necessary to dive deeply into history, and although during the time of the principalities there is no talk of the Russian empire, and even less of a regular army, the emergence of such a concept as defense capability begins precisely from this era. In the 13th century, Rus' was represented by separate principalities. Although their military squads were armed with swords, axes, spears, sabers and bows, they could not serve as reliable protection against outside attacks. United Army

A serviceman's shoulder straps are his unique calling card, that is, one glance at the shoulder insignia is enough to understand what rank the soldier has. The stars on the shoulder straps provide enough information about which officer corps the serviceman belongs to. However, the shoulder straps and stars did not immediately acquire their modern look. In pre-revolutionary times, they were interspersed with additional stripes called stripes. Only later did the stars on shoulder straps become

Shoulder straps are external shoulder insignia in various law enforcement agencies; they can be used to determine membership in a particular department, as well as the type and branch of the military. A serviceman's rank is determined by the size, number and location of stars on his shoulder straps. It is very important to know how to correctly attach stars to shoulder straps because, according to the order of the Minister of Defense of the Russian Federation, all parameters for the location of stars for military personnel of the Russian Army and the Order of the Minister of Internal Affairs

There are several ways to attach shoulder straps to a shirt. Simple ways There are several such options for a match, for a pin, for an edging, for a paper clip. Attaching with a paperclip. In order to understand how to attach shoulder straps to a shirt using this method, you need to follow the following steps step by step. First of all, the insignia itself and the shirt must be carefully ironed. This action is performed so that they lie better on the shirt. At

Shoulder straps are special shoulder insignia that are necessary to distinguish military ranks and positions. They are used by the Armed Forces, Police and other paramilitary forces. That is why many are interested in this question: How to sew an epaulette on a jacket It would seem that this is very simple to do, but in fact this is not entirely true. History of shoulder straps For the first time, shoulder straps were introduced by Peter I around 1683-1699. They used to help

People who have never faced the question of how to sew shoulder straps onto a police jacket find it quite difficult to bring their uniform into proper appearance. Therefore, it is necessary to understand the features and possible methods of attaching shoulder straps to outerwear. What tools do we need? To work, we need patience, perseverance and good lighting, as well as the following tools: a needle, scissors, a thimble, if necessary

Recruits who are about to serve in the army and navy receive sets of new-style military uniforms. The photo shows the everyday uniform for the ground forces, navy and aerospace forces of the combined Air Force and Aerospace Defense Forces, as well as the Airborne Forces. The Ministry of Defense has determined a new procedure for issuing military uniforms to conscripts before being sent to military units. 1. Instead of VKPO, an all-season set of field uniforms

The Armocom company, specializing in the creation of composite materials of a protective nature, presents modern protection kits for helicopter crews. The name of these kits is Vulcan-VKS. The kits are capable of protecting the helicopter crew not only from open flames and other types of thermal effects, but also from the effects of so-called secondary fragments. The kit helps prevent pilots’ knee and elbow joints from mechanical injuries. Vulcan-VKS equipment

The military uniform of the armed forces of the Russian Federation has always been distinguished by certain features. They are divided by color and purpose. Military uniforms can be intended for daily use, for field activities and for festive occasions. All these types of clothing are also divided into summer and winter options. The Ministry of Defense has carefully studied this issue, detailing orders on this aspect of the life of military personnel. The matter concerned

In the course of their activities, military personnel have the opportunity to demonstrate heroism, professional knowledge, valor, and courage. The experience and skills of those who have given a huge part of their lives to military service are especially valued. As a sign of gratitude and respect, various medals are established by the Ministry of Defense or public organizations. On Defender of the Fatherland Day, upon the recommendation of the unit command, a current or former serviceman may receive a medal as a veteran of the Russian Armed Forces as a reward.

In 2002, the Union of Paratroopers association was born in Russia. It unites not only military personnel of the Airborne Forces, it is, most likely, the camaraderie and brotherhood of those who valiantly defended the interests of the Motherland on its territory and abroad. We can say that veterans of the elite airborne forces, marines, and special forces form the backbone of the presented organization. They consider the purpose of their activities to be assistance in protecting the rights of military personnel, especially those who were wounded during

Sleeve insignia of the Russian Armed Forces, sometimes incorrectly referred to as chevrons, sleeve insignia are worn on the right sleeve of military uniforms and are intended to distinguish services, departments, organizations, institutions, associations, and formations by belonging to the armed forces formations. Sleeve insignia by formation, used in the RF Armed Forces from 2005 to 2010. Individual officials, military authorities and organizations of the Ministry of Defense

The patches on the uniform of the RF Armed Forces are called sleeve or breastplates and are subject to a number of rules. Let's talk about the difference between chevrons and stripes. Chevron patch indicating rank. More specifically about what a chevron is is written here. New patches in the Russian army appeared towards the end of 2013, it was then that the emblems that are found on all modern patches were selected. Then 13 options were considered, many of them were worked on by the best

In Russian legislation, a number of documents establish the need to provide military personnel. In general, this concept is quite flexible, since it is necessary to take into account all the rights of a citizen serving in military service in order to list all the components of allowance. Therefore, provision is divided into several categories: monetary allowance, clothing provision, medical care, food housing provision. For each category

Each element of a military uniform has a specific purpose and does not appear on it by chance, but under the influence of certain conditions, including historical ones. We can say that each element of the form carries both a historical load and a utilitarian purpose. There is a widespread misconception that shoulder straps as an element of a military uniform come from knightly armor, or rather metal shoulder plates that protected a warrior’s shoulders from saber strikes. This is a misconception from year to year,

The time of multimillion-strong mass armies is coming to an end. Nowadays, the outcome of the battle is decided by relatively few professionals, and the level of training of the fighter and his equipment comes first. Despite the widespread use of electronics on the battlefield, its outcome, as before, is decided by people. The time when a fighter had an AK-47 at his disposal and was protected only by body armor of not the best quality and is not always gradually becoming history. Almost all advanced armies

The unloading vest, of course, is far from the only type of combat equipment, but today the situation has developed that a fighter, when purchasing equipment, chooses either a combat breastplate or a unloading vest. Apart from Russia, where the RZh unloading vest is part of the standard equipment of an infantryman, vests are used in many armies around the world. Turkish mountain riflemen, gendarmerie and rangers are working against the Kurds to unload the load. Having a large selection of different

Increasingly, in news reports from hot spots, you can hear the word special forces, which means special forces units as part of certain security or law enforcement agencies. This indicates the increased role of special operations forces of the FSB and GRU units in resolving power conflicts. To effectively achieve your goals, you need an appropriate form of clothing, which, in addition to convenience, should protect the fighter from

Almost all modern armies are supplied with uniforms intended for use directly on the battlefield, field uniforms. Most armies in the world have this uniform in camouflage coloring. This material provides an overview of the main camouflage colors currently used in various armies of the world. It should also be noted that this material does not cover the topics of uniform cut, quality characteristics of fabric, and the like.

There can be no regimes in matters of state security. Sovereignty and integrity must remain at the highest level every minute of the year. To ensure reliable protection, the state is obliged to maintain a powerful army, ready at any moment to repel an attack from an external enemy. Military activity is a complex process that does not stop day or night. Even when the personnel seem to be resting, there are duty officers, guards, patrol officers,

Relationships in the army must be strictly regulated. This requirement arises from at least two considerations. The first is that the personnel is a quasi-group organized according to certain common features. Psychologists say that if such a group is left to its own devices, conflicts in relationships will soon arise. The second statement is more significant. The army must not only be numerous, but also functional and controllable.

As long as the soldier has not retired to the reserve and remains on the list of unit personnel, he is guided by the general military regulations. Certain standards have also been developed for a serviceman in the event of his temporary stay outside the unit. But, as we know, the lack of control necessarily leads to violation of all rules, and the volume of these violations grows like an avalanche. Therefore, in any garrison, as a mandatory event, the organization of patrols is provided, which is carried out in places

They do not emit a warlike roar, they do not sparkle with a polished surface, they are not decorated with embossed coats of arms and plumes, and quite often they are generally hidden under jackets. However, today, without this armor, unsightly in appearance, it is simply unthinkable to send soldiers into battle or ensure the safety of VIPs. Body armor is clothing that prevents bullets from penetrating the body and, therefore, protects a person from shots. It is made from materials that dissipate

List of military ranks of military personnel of the armed forces of the Russian Federation Composition of military personnel Military ranks of military ships Soldiers and sailors Private cadet Corporal Sailor cadet Senior sailor Sergeants and petty officers Junior sergeant Sergeant Senior sergeant

As you know, every element of the uniform of the military and security forces either has a practical purpose or exists as a kind of symbol, and shoulder straps are no exception. Shoulder straps, like all other elements of a military uniform, contain a rich history. However, there is a very popular misconception that shoulder straps as an element of a military uniform are descendants of knightly armor, namely special shoulder plates made of metal that protect the shoulders

Shoulder straps are insignia of one or another professional and similar corporation on uniform corporate clothing to designate a wide variety of corporate characteristics and differences in ranks of personal military ranks and special class ranks, positions of belonging to a specific ministry, department, organization or service, including clan troops, branches of the armed forces, special forces, and the like.

We will have to start the story about the introduction of insignia in the Soviet army with some general questions. In addition, a short excursion into the history of the Russian state will be useful so as not to formulate empty references to the past. The shoulder straps themselves represent a kind of product that is worn on the shoulders to indicate a position or rank, as well as the type of military service and service affiliation. This is done in several ways: attaching strips, sprockets, making gaps, chevrons.

The shoulder straps of the Tsarist army of 1914 are rarely mentioned in feature films and history books. Meanwhile this interesting object studied in the imperial age, during the reign of Tsar Nicholas II, uniforms were an object of art. Before the outbreak of the First World War, the distinctive insignia of the Russian Army was significantly different from those used now. They were brighter and contained more information, but at the same time did not have functionality and were easily noticeable in the field

Shoulder straps are part of a serviceman's clothing, and the arrangement of stars on the shoulder straps is considered to be a sign of rank distinction between colleagues. However, it is very important to know at what distance the stars should be on this part of the uniform, since punctuality, discipline and strict adherence to instructions play a huge role in the army. A soldier's appearance must always be impeccable. The placement of stars on shoulder straps according to certain regulations also contributes to

Ratnik is Russian military equipment for a soldier, also called the kit of the soldier of the future. Ratnik is part of a general project to improve the quality of an individual soldier on the battlefield through the use of the latest scientific achievements in the field of navigation, night vision systems, tracking the psychophysiological state of a soldier, and the use of advanced materials in the manufacture of armor and clothing fabrics. The system is a complex of modern means of protection,

Russian combat equipment for military personnel Ratnik was developed by FSUE TsNIITOCHMASH. Basic principles for creating a basic complex of special clothing items: Combination of optimal weight, volume, functional and protective features, incl. hygienic and physical-mechanical properties for operation in particularly intensive conditions and in isolation from the main forces when performing tasks. The versatility of the complex. Camouflage properties developed the most universal color and

Russia has completed the development of the new Ratnik combat equipment, which is a complex of weapons, personal protective equipment, reconnaissance and communications. The first serial sets of equipment have already been delivered to the troops. Several units of the Russian Ground Forces marched in them across Red Square on May 9, 2015. According to the Ministry of Defense, the purchase of Ratnik is already included in the state defense order for the current year, however, exactly how many sets of equipment will be supplied to the troops is still unknown.

On June 1, 1998, by order of the Commander of the Railway Troops of the Russian Federation 171, the Veteran of the Railway Troops badge was established. This sign became the first official symbol, marking the beginning of the development of a strict departmental heraldic system in the Federal Service of the Railway Troops of the Russian Federation. A year earlier, in preparation for the upcoming 2001 150- and summer anniversary military railway workers, the command of the FSGV decided to begin a comprehensive

Military clothing is the key to the high combat effectiveness of military forces. In Russia, the military uniform meets all the necessary requirements; it is comfortable, reliable and performs its main functions. A new military uniform in our country was released in 2015. Now every soldier of the military forces is equipped with it. Along with the new clothes, new rules for wearing them were issued, which must be followed by a soldier of any rank. Military uniforms are divided into three main types. Dress uniforms are used.

The modern Russian army has a complex hierarchical structure based on the subordination of lower levels to higher ones. Unconditional submission within the limits of the military regulations is defined by law, and violation of the order is punishable by a military court. In order to effectively carry out management activities, the hierarchical system is implemented by assigning each military personnel a certain military rank. Already at the very beginning of his conscription service, the young man receives the rank of private. Highest rank other than Supreme

Many articles, even from legally savvy specialists, are devoted to various ways to avoid military service. It is gratifying that the proportion of conscripts who are ready to cross the line of the law is quite small. Most guys not only realize the need to fulfill their civic duty, but also consider it their duty to spend a year in the army as a real soldier, who would be an excellent student in combat training, selflessly serve the Motherland, be in good standing with the officers and become the pride of his

Many people ignorant of military affairs may wonder what kind of troops the Russian army has. The answer here is very simple: Russian units include elite troops, ground units, navy, and aviation. Each part performs its own function. For large units, navy, air force, ground forces, there are support departments such as air defense, artillery. Many parts are intertwined. The regiments began to develop into their modern form after the collapse of the Russian Empire.

The army, to one degree or another, affects every citizen, so, willy-nilly, people are aware of it. But the army is too general and abstract a concept, including tanks and foot wraps, nuclear weapons and stars on shoulder straps, and much more. In order to organize troops by type, establish a certain hierarchy and divide the territory of the state into controlled areas, there is a special term - the organizational structure of the armed forces of the Russian Federation. With his help we are today

For any state, the armed forces are the guarantor of its security and inviolability of territorial borders. In Russia, the army organizes its activities on the basis of certain regulatory documents, these are Federal laws, Government Decrees, Presidential Decrees, as well as local resolutions of executive authorities in the regions. Thanks to a unified legal system, it is possible to effectively manage a contingent of thousands, distributing common tasks and quickly resolving security issues.

The army is perhaps the largest institution that is considered to be regularly functioning. If we add to the contingent currently in service all those liable for military service, including those in the reserves, then more than half of all Russian citizens will be covered. Naturally, the armed forces will reach such a size only as a last resort, when military aggression from another state is inevitable, but even the existing military personnel, of whom there are hundreds of thousands, must be centralized

False shoulder straps, a derivative of false shoulder straps, are analogous to the shoulder straps on which stars are sewn. They differ from standard ones in that they are used in the field, since during military exercises or in a real combat situation it is necessary to act quickly and swiftly, and during such actions the stars may simply fall off the shoulder straps. Despite the fact that every military man has spare stars, no one needs extra losses. Besides

Since the founding of this type of troops, the uniform of the Airborne Forces has been no different from the clothing of the Red Army Air Force or special purpose air battalions. The set of clothing of a USSR intelligence soldier included a leather or blue-gray canvas helmet. Moleskin overalls could be either leather or blue-gray canvas. The collar of the overalls was equipped with blue buttonholes, where insignia were sewn. Already in the forties, military uniforms

The uniform of the Russian Navy has a rather long history. Over the decades, it has undergone and is undergoing many changes and the emergence of new and different versions of it. In the article we will look at a short history shapes, its various options and principles of wearing. History of naval dress The history of the Navy uniform dates back to the time of Peter the Great. By order of the powerful manager-emperor in 1696, the Boyar Duma adopted

In 2015, the Russian army will change its clothes. Some military personnel already have a new military uniform. According to the plan of the Russian Ministry of Defense, new uniforms were required to be provided to all military personnel by the end of 2014. This was stated by Deputy Minister of Defense of Russia Dmitry Bulgakov. The need to redress the ranks of the Russian army has existed for a long time. Along with the new set of clothes, new rules for wearing military uniforms will be introduced. In 2014, new clothing was received

New clothes for the Russian army should have been developed back in 2009 under the leadership of the country's chief couturier Valenitin Yudashkin. However, the disagreement of the officers pushed back the deadline for its production. The new model military uniform was presented only in 2012, by the BTK Group company from St. Petersburg. The new military clothing is made of 8 layers. When performing various combat missions, a fighter can use the layer necessary for him, depending on

The Electrically Heated Ratnik-Arctic uniform, commissioned by the FSB Border Research Center, has been adopted by the FSB Border Service, which guards borders in the Arctic. The development of the form was carried out by NPC Voenform-design LLC. The technical conditions for the production of the uniform were prepared by June 2013, and in 2015, the Warrior-Arctic was first received by military personnel of the northernmost Russian border post Nagurskoye, located on Earth

Military uniforms - field, everyday and ceremonial uniforms - are always regulated by the relevant decrees of the Ministry of Defense. However, there are special forces formations in the law enforcement agencies of ministries and departments not related to the Russian Armed Forces, which perform specific tasks, for which they use a very wide range of military and universal uniforms. Special forces uniforms Classification of special forces units Existing units

Traditional disclaimer. This article in no way claims to be complete or the ultimate truth. The topic of Russian equipment in the nineties is huge and complex, and my modest work is just a superficial educational program, an introduction to the topic. The USSR approached its collapse with very primitive equipment, which looked poor even against the backdrop of the then simple equipment of the NATO armies. However, in the nineties, despite the severe economic crisis and lack of money, progress in the field of military equipment,

Each branch and type of troops has its own attributes. In addition to the battle flag and chevrons, the concept of distinctive signs includes shoulder straps. It is by this accessory that one can determine not only the rank of a serviceman, but also his affiliation with one or another army. However, it is very difficult for an unprepared person to do this. Today we will try to understand the colors and letter designations on the shoulder straps of military personnel and cadets of the Russian army, as well as law enforcement agencies. Shoulder straps

The infantry chevron indicates belonging to the ground forces. Ground forces patches are available on sleeves and chest, everyday, ceremonial and field. For special units of the Navy ground forces there is a special Marine Corps chevron. Chevron of the Ground Forces of the new model In accordance with Order 300, the new sleeve insignia of the Ground Forces is made in the shape of a rectangle. Sleeve insignia of the North of Russia. Sword

The protective kit for crews of armored vehicles 6B48 Ratnik-ZK was put into service in 2014. The manufacturer of this kit is the Moscow Center for High-Strength Materials Armocom. This kit is designed to protect crew members of combat vehicles from exposure to open flames, thermal effects, secondary fragments formed in the habitable compartment, as well as to protect elbow and knee joints from various types of mechanical damage. Produce high quality products

In June 2017, the media received information about the replacement of the old red star emblem of the Russian Armed Forces with a new red-blue-white star. The news alarmed many public figures, prompting them to react violently to it. The new symbol was released by a subordinate design bureau, which named it the Russian Army. According to the creators, the new star will enhance the image of the Russian army and give it more masculinity. The origins of the symbol of the Russian army

Shoulder badges of the Federal Bailiff Service (on a white shirt) for employees with the following class ranks: State Counselor of Justice of the Russian Federation 3rd class, State Counselor of the Russian Federation 3rd class; State Counselor of Justice of the Russian Federation, 2nd class, State Counselor of the Russian Federation, 2nd class; State Counselor of Justice of the Russian Federation, 1st class, State Counselor of the Russian Federation, 1st class;

Shoulder straps for police officers and internal service officers of the Ministry of Internal Affairs of the Russian Federation with a special rank of intermediate commanding staff- iaior. Length -14 cm. Equipped with a strap. According to the order of the Ministry of Internal Affairs of Russia dated July 26, 2013 No. 575, shoulder straps are fastened to clothing with buttons with a diameter of 14 mm without a rim. The stars are embroidered with 3% gold.

Shoulder straps for police officers and internal service officers of the Ministry of Internal Affairs of the Russian Federation with special ranks of senior command personnel - major, lieutenant colonel, colonel. Length -14 cm. Equipped with a strap. According to the order of the Ministry of Internal Affairs of Russia dated July 26, 2013 No. 575, large corrugated stars are strengthened on this type of shoulder straps. Shoulder straps are fastened to clothing with buttons with a diameter of 14 mm without a rim. Designed to be worn on a gray jacket.

Shoulder badges of the Federal Bailiff Service (on a white shirt) for employees with the following class ranks: Secretary of State civil service Russian Federation 3rd class; Secretary of the State Civil Service of the Russian Federation, 2nd class; Secretary of the State Civil Service of the Russian Federation, 1st class; Lawyer 3rd class, assistant of the state civil service of the Russian Federation 3rd class; Lawyer 2nd class, assistant of the state civil service of the Russian Federation 2nd class; Lawyer 1st class, assistant of the state civil service of the Russian Federation 1st class; Advisor to Justice 3rd class, Advisor to the State Civil Service of the Russian Federation 3rd class; Adviser of Justice, 2nd class, adviser to the state civil service of the Russian Federation, 2nd class; Advisor to Justice, 1st class, Advisor to the State Civil Service of the Russian Federation, 1st class;

Emblem on shoulder straps Prosecutor's Office gold metal small. For installation on shoulder straps intended to be worn with light blue and white uniform shirts.

Golden shoulder badges (for employees Investigative Committee Russian Federation, having the highest special rank) Removable shoulder badges are made in the shape of a rectangle with a trapezoidal upper edge, a field of specially woven braid and red edging on all sides except the bottom. Shoulder badges of employees with the highest special ranks are made from galun of a special weave of golden color from copper wire 5% gilding without gaps. Shoulder badges have a belt loop. At the top of the shoulder insignia there is a golden button with the image of the State Emblem of the Russian Federation without a heraldic shield. The distance from the upper edge of the shoulder badge to the center of the button is 10 mm, the diameter of the hole for attaching the button is 6 mm. Button diameter -14 mm. On shoulder badges for employees with the highest special ranks, the height of the small emblem is 22 mm, the width is 16 mm. The distance from the center of the button to the edge of the small emblem is 10 mm towards the lower edge of the shoulder straps. The small emblem is embroidered with golden thread, 5% gilding, and edged with red thread. On the shoulder badges there are embroidered stars made of gold-colored gimp, 5% gilding, with a diameter of 22 mm. The stars are edged with red thread. The width of the braid is 45 mm, the width of the edging is 2.5 mm, the length is 14 cm. Permissible deviations in width and length are no more than 2 mm. Shoulder signs consist of top parts, a lining and two liners (made of electrical insulating cardboard and a hard PVC liner).

Please call for production time. Prepayment of 100% of the cost.

Golden-colored shoulder badges (for employees of the Investigative Committee of the Russian Federation who have a higher special rank) Removable shoulder badges are made in the shape of a rectangle with a trapezoidal upper edge, a field of specially woven braid and red edging on all sides except the bottom. Shoulder badges of employees with the highest special ranks are made from galun of a special weave of golden color from copper wire 5% gilding without gaps. At the top of the shoulder insignia there is a golden button with the image of the State Emblem of the Russian Federation without a heraldic shield. The distance from the upper edge of the shoulder badge to the center of the button is 10 mm, the diameter of the hole for attaching the button is 6 mm. Button diameter -14 mm. On shoulder badges for employees with the highest special ranks, the height of the small emblem is 22 mm, the width is 16 mm. The distance from the center of the button to the edge of the small emblem is 10 mm towards the lower edge of the shoulder straps. The small emblem is embroidered with golden thread, 5% gilding, and edged with red thread. On the shoulder badges there are embroidered stars made of gold-colored gimp, 5% gilding, with a diameter of 22 mm. The stars are edged with red thread. The width of the braid is 45 mm, the width of the edging is 2.5 mm, the length is 14 cm. Permissible deviations in width and length are no more than 2 mm. Shoulder signs consist of top parts, a lining and two liners (made of electrical insulating cardboard and a hard PVC liner). Please call for production time.

“No one but us” - who has not heard this glorious motto of the Airborne Forces. Every year at the very beginning of August, our streets and avenues are full of blue-striped T-shirts, vests, and blue berets with red stars - our glorious paratroopers celebrate their professional holiday. Due to the high complexity of the tasks for which this unit of troops was created, the Airborne Forces have always been considered elite and took only the strongest, healthiest and strongest. The first landing operations were carried out during the Second World War, and since then not a single major armed conflict has occurred without the participation of the Airborne Forces. The tasks of these units include landing behind enemy lines, destroying their infrastructure and manpower, and carrying out sabotage operations behind the front line. Also, the Airborne Forces more than once participated in conventional ground operations, and, due to the highest level of their training and combat capability, carried them out brilliantly, thereby saving ordinary military units from much more numerous casualties. They were always sent to the “hottest” and most troubled spots in the country and the world. That is why the Ryazan Higher Airborne Command School has long become the dream of tens of thousands of boys who, from early childhood, begin to prepare for a military career. They run cross-country courses, do pull-ups, and do push-ups, preparing to meet the required standards. And, despite this, only a few can get there, due to the strictest conditions for admission.

you can buy Airborne shoulder straps RF new sample in our Tylovik online store at the best price. When purchasing them from us, you can rest assured of the quality, because only high-quality materials are used in their production. For this reason, you do not have to worry about the wear resistance and durability of your shoulder straps; they will serve you faithfully, in rain, frost and cold, accompanying you in the process of performing your difficult and so necessary service. We have shoulder straps of the Airborne Forces, ceremonial and everyday ones for shirts, tunics and jackets. Our assortment includes shoulder straps for both privates and generals, with machine embroidery with golden threads of the legendary Airborne Forces emblem: a golden open parachute, the figure of a parachutist and two planes on the sides.

Our store specializes in goods for military personnel and special forces workers, thereby providing the widest range products that you will not be disappointed with. You can get acquainted with it both in our military stores in Moscow and in the Tylovik online store, because we deliver throughout Russia!

On November 2, 1930, during an exercise in the Moscow Military District, twelve people were air-dropped as part of a special unit. It is this moment that is taken as the starting point of the history of our Airborne Forces. Throughout its existence, not only the status of the paratroopers changed more than once, but also their uniforms.

The uniform of our Airborne Forces received its current form relatively recently and has become a kind of calling card of one of the elite units of the Russian army.

First paratrooper uniform

Until the 40s of the last century, the uniform of the airborne detachment differed little from the uniform of the Red Army soldiers serving in the aviation troops. It consisted of a leather or canvas helmet with a soft lining and overalls made of moleskin or avisent. The blue buttonholes sewn to the collar of the overalls indicated that the detachment belonged to aviation.

The edging of the buttonhole indicated the official position of the serviceman: the command staff had a golden edging, while political workers, sergeants and privates wore uniforms with buttonholes with black edging, which was considered an everyday (or as it is now called - office) option. At the beginning of the Great Patriotic War, overalls were replaced by trousers with large patch pockets and a jacket.

The paratrooper's equipment in the pre-war years, in addition to the uniform, consisted of the following elements:

1. Main parachute. Before the war of 1941 and for some time after its outbreak, airborne troops used the PD-6 parachute, which is essentially a licensed analogue of the American “Irvin”. Before establishing their own parachute production, the Soviet military performed jumps with American parachutes.
2. A reserve parachute, or a line cutter.

The complete equipment of an Airborne Forces employee was:

• two parachutes (main on the back, reserve in the lower abdomen);
• duffel bag;
• a machine gun with a magazine removed, which was attached vertically with the barrel down behind the left shoulder.

IN winter time A large sheepskin collar of dark blue, brown or khaki color was attached to the overalls with buttons or a zipper. When raised, the collar was tightened with internal straps. Often, the style of winter airborne uniforms directly depended on the manufacturer's factory.

After the failed Finnish campaign, the military personnel were dressed in padded jackets, short fur coats, felt boots, cotton trousers, and a hat with earflaps. At the same time, the winter version is equipped with a camouflage white robe with a hood.

Headgear of paratroopers

The headdress was another way to show the official affiliation of a soldier. For commanders after 1938, a dark blue cap was officially approved as a headdress.

After 1941, its color was changed to a protective green hue.

The upper part, rim and band of the cap were decorated with blue edging. She also wore a cockade with a red star surrounded by a wreath of laurel leaves. During the parachute jump, the command staff used special caps, which were fastened under the chin with straps.

Ordinary paratroopers wore caps of dark blue color with blue piping and stars made of cloth, on top of which red stars were attached.

By the beginning of the war, the Airborne Forces had several standard clothing options, which depended on the time of year and official position:

Since the helmet could fly off the paratrooper during a jump, this headgear was used exclusively during ground battles.

The evolution of the Airborne Forces headdress

The blue beret can easily be called the calling card of a modern paratrooper, but it only became part of the uniform after 1969. On June 30, 1967, the commander of the Airborne Forces, Colonel General V.S. Margelov. a new sample of the form was approved, created according to the sketches of the artist A.B. Beetle.

The artist proposed two options for the appearance of Airborne Forces employees:

• The daily uniform of the Airborne Forces included a khaki beret and a red star. This coloring of the headdress remained on paper.
• The second option involved wearing a crimson beret, and it was this that was accepted.

The right side of the beret was decorated with a blue flag with the symbols of the Airborne Forces, the so-called “corner”, and on the front side of the beret there was a star surrounded by a wreath of ears.

For officers, a beret with a 1955 model cockade and a star with wings were provided.

During the military parade on November 7, 1967, paratroopers wearing crimson berets marched across Red Square. And already in 1969, an order was issued that officially approved a new type of uniform for Airborne Forces employees with a blue beret.

The tradition of wearing a beret is different among paratroopers and airborne reconnaissance officers. The former wear the beret curved to the right, while the special forces of the air forces have an unspoken rule to bend the beret to the left.

The editors of the site hope that readers do not shy away from military service. You can read how you are punished for evading the army on this website.

The airborne troops were separated into a separate branch of the military only in 1991. Until this moment, paratroopers belonged to the ground forces, navy, and air force, and since 1946 they have been included in the reserve structure of the Supreme Commander and are directly subordinate to the supreme commander in chief.

In this regard, the color scheme of the uniform and insignia of the senior and junior command staff of the Airborne Forces were associated with the branch of troops to which they belonged in this moment.

In addition, the type of uniform of the Soviet paratrooper depended on the climatic conditions of the landing site and the position of the employee. It is customary to distinguish four groups of military clothing of the Soviet Airborne Forces:

• casual summer uniform for sergeants and privates;
• summer uniform for sergeants, privates and air force cadets;
• casual summer set with shoulder straps and buttonholes for cadets;
• winter version of the uniform with sleeve insignia for sergeants, military builders and airborne cadets.

At the beginning of the Great Patriotic War, the equipment of paratroopers included a dark blue overcoat; a little later its color was changed to a combined arms color. Also, the equipment of the airborne special forces included so-called camouflage robes: white for winter and protective spotted colors for summer. Exactly the same robes were worn by scouts and riflemen of the assault group.

During the special mission, the landing group was additionally equipped with special uniforms. This included overalls, helmet, high boots, and goggles.

After the introduction of shoulder straps, aviation insignia appeared. The famous emblem with a parachute and two planes on either side was introduced in 1955. It is this badge that today is a symbol of unity and brotherhood of employees in air forces.

In 1979, a limited contingent of troops was introduced into Afghanistan, including a special group of airborne forces. In view of the climatic conditions of the territory of presence, a special airborne force was developed. The prototype was the uniform of the army of the President of the Congo.

Features of the old-style Airborne Forces dress uniform

For special occasions, the air infantry was provided with a ceremonial set of uniforms, presented in summer and winter versions. In 1988, it underwent a number of changes.

Old style summer dress uniform:

• cap with band;
• untucked trousers;
• open uniform;
• White shirt;
• black tie;
• White gloves;
• black low shoes or boots.

The ceremonial set of the summer uniform had a blue (sea) wave color.

The ceremonial winter uniform of an old-style Airborne Forces soldier:

• hat with ear flaps, lieutenant colonels have a hat;
• gray overcoat;
• open uniform;
• blue trousers untucked;
• White shirt;
• black tie;
• white muffler;
• brown gloves;
• black boots.

Since 1967, the beret has become part of the ceremonial set of clothing, replacing the cap.

Distinctive features of the field uniform

Soviet paratroopers had two options for clothing for field conditions: summer and winter. The summer field uniform set included:

• cap;
• jacket and trousers in khaki colors;
• vest;
• boots or high boots.

Description of the winter uniform of the Airborne Forces:

• hats with earflaps;
• khaki jacket and pants;
• gray muffler;
• brown gloves;
• berets or boots.

The entry of Soviet troops into Afghanistan required the leadership to reconsider the equipment of employees. The classic field uniform is being replaced by a lighter version, popularly called Mabuta after the colonel of the Congolese army. It was made of raincoat fabric with water-repellent impregnation, ventilation system and more comfortable fit.

The sand uniform consisted of trousers, a jacket and a cap and was used during combat missions in regions with a hot climate.

What do modern paratroopers wear?

The shape of the new airborne forces is based on the principle of multi-layering. Depending on weather conditions, military personnel are allowed to combine clothing:

• the modern uniform of the Russian Airborne Forces includes several combinations and sets of diverse clothing;
• in the cool season, soldiers are provided with an additional lined jacket;
• often military personnel from the special forces of the Airborne Forces are allowed to wear a jacket under their jacket;
• in rainy, damp weather, the uniform consists of an underwear fleece shirt and overalls with waterproof impregnation.

Thus, what uniform the airborne soldiers will have in a particular case is decided independently by the unit commander, taking into account weather conditions.

A modern hat with earflaps has elongated ears, making it easy to overlap and fastened with Velcro, protecting the chin.

Additionally, the hat is equipped with a top flap, allowing it to turn inside out and transform into a visor. Felt boots have been replaced warm boots with thermal inserts. The outer jacket is a designer one and can easily be transformed from a windbreaker into a warm peacoat.

The new uniform set of the Russian Airborne Forces uniform for soldiers and field officers includes 19 items:

• several jackets;
• insulated vest;
• costume;
• three types of boots (summer, demi-season and winter);
• balaclava;
• mittens and gloves.

The summer uniform of the airborne special forces includes:

• underwear (T-shirt and boxer shorts);
• light jacket;
• trousers;
• cap (beret);
• summer boots.

To sew a lightweight version of the Airborne Forces uniform, mechanical stretch, treated water-repellent composition.

Winter uniform for the Airborne Forces option includes:

• two sets of insulated underwear (lightweight and fleece);
• demi-season suit;
• windproof suit;
• insulated vest;
• boots;
• balaclava.

In winter, it is allowed to wear a blue sweater under a jacket that is part of the uniform.

The winter uniform of an officer and warrant officer of the Airborne Forces allows the wearing of a black fur hat and a black jacket.

For hot climates, a separate set of uniforms for airborne troops was developed. The new uniform of airborne troops has a light brown or sandy color.

The first option consists of a short-sleeved shirt with a turn-down collar, shoulder straps, trousers and boots in a basic color. The headgear used is a soft cap similar to a baseball cap with a hard visor and a field cockade.

Shorts are allowed instead of trousers. Insignia on this type of uniform are placed similarly to everyday uniforms. This clothing option does not include award stripes. The second option consists of an elongated jacket with shoulder straps, trousers tucked into ankle boots. On the head is a cap or Panama hat that matches the statutory uniform.

Casual or office workwear for the air infantry is similar to the uniform of the Ministry of Emergency Situations, only in blue.

The field uniform of an officer is exactly the same as that of the enlisted personnel of the Airborne Forces, only the dress clothes are different.

The ceremonial set of the Airborne Forces uniform consists of a blue jacket and trousers, a vest, a blue beret, aiguillette, white gloves and ankle boots.

Officer ceremonial uniform:

• blue jacket;
• untucked blue trousers;
• shirt;
• black tie;
• White gloves;
• black boots;
• gold aiguillette;
• blue cap with cockade.

The winter dress uniform of midshipmen and airborne officers includes a black jacket, a woolen cap or blue beret, a vest and combat boots. For enlisted personnel and cadets:

• gray hats with earflaps;
• demi-season blue jacket;
• costume;
• vest;
• beret.

Airborne special forces take part in the parade in field uniform. Not only shoulder straps, but also chest and sleeve stripes and chevrons are used as insignia.
Before the collapse of the Soviet Union, the uniform was identical for all Airborne Forces employees, regardless of the republic.

Today, every country that was part of the USSR has own version forms. In the Russian Federation, the main ceremonial color of the Airborne Forces uniform is blue.

For example, not so long ago, the uniform of the highly mobile Ukrainian Airborne Forces was completely changed, in particular, the blue beret was removed from the military personnel’s clothing, replacing it with a similar purple-colored headdress. The main reason for this transformation is that in Russia the blue beret is an integral part of the Airborne Forces uniform.

In turn, in the Republic of Belarus the uniform of the special forces of the airborne special forces still includes a blue beret, as in Russia.

Clothing option for women

Despite the fact that there have been girls in the ranks of paratroopers before, until recently, service in the Airborne Forces was the privilege of men. So in 2008-2009 “Ryazan Higher Airborne School named after. Margelov” was recruiting girls to master the profession of a paratrooper officer. Six years later, the educational institution repeated the experiment.

The female airborne combat uniform is exactly the same as that of men:

• several jackets;
• costume;
• three boot options;
• mittens and gloves;
• balaclava;
• insulated vest.

Women's parade airborne uniform:

• blue jacket;
• blue skirt;
• White gloves;
• white muffler;
• black boots.

What is a birch pattern

Camouflage is a mandatory part of the equipment of the military and, in particular, the reconnaissance troops of the Airborne Forces. The range of camouflage suits is wide, which allows you to choose the ideal camouflage for any climatic and weather conditions. Despite this, the leader of camouflage clothing until recently was the birch (official name KZM-P).

Initially, camouflage with a birch tree pattern was developed for border troops, later he came to the liking of the Airborne Forces intelligence officers.

A camouflage suit with a birch pattern was created in 1957 and was used as part of the summer equipment of border guards and paratroopers. This camouflage ideally hid the fighter in deciduous forests and swampy areas. Due to its special pixel pattern, KZM-P is capable of dispersing the silhouette of a person at short and long distances.

The raster pattern of the birch camouflage suit resembles spots with jagged edges. Large and small patterns create an optical illusion of a melting silhouette. The light and dark colors of the camouflage coat suggest its use during the day and at night.

Ghillie suits with a birch tree pattern are presented in the form of a camouflage suit with a voluminous hood, overalls and a jacket with pants.

Although today the birch camouflage is not a statutory uniform, it is still popular, not only among the military, but also among civilians.

What kind of demobilization uniform do paratroopers have?

The tradition of sewing a demobilization outfit comes from the Soviet Union, when military service was considered honorable. DMB is a kind of confirmation that the soldier served well and is proud of his army uniform. What can we say about the guys who paid their debt to the Motherland in the ranks of the Airborne Forces.

And although in the early 90s they preferred to go into the reserves in civilian clothes, today military personnel have returned to this beautiful custom.

The demobilization uniform of an Airborne Forces soldier is prepared on the basis of a field uniform using several rules:

• the suit should not be pretentious or overly elegant;
• placement of insignia and external chevrons is carried out in accordance with the statutory rules.

For the layout of the suit, an acanthus tunic or “gorka” can be used, which is often chosen by airborne special forces, trousers, a vest and combat boots. A mandatory attribute of the finished outfit is a blue beret.

Today it is not at all necessary to sew a demobilization suit yourself, since online stores offer ready-made options.

It is an honor to serve in the airborne forces and many guys would like to be in the ranks of the blue berets. But this honor is not granted to everyone, which does not prevent civilians from trying on the paratrooper uniform.

Today there are not only adult, but also children's airborne uniforms on sale. Why do civilians wear military uniforms at events dedicated to the celebration of victory and other celebrations? Everyone has their own reasons for this. For example, children's military uniforms of the Airborne Forces are popular during the celebration of Victory Day.

On the other hand, as boxer Denis Lebedev explained, this shows respect for the paratroopers. It's hard to disagree with the athlete; they really deserve respect.

Video

Semi-fitting dress in dark blue with a V-neck, decorated with a red silk scarf (included in the set). Fabric - gabardine. According to the order of the Ministry of Internal Affairs of Russia No. 575, chevrons are sewn onto the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. A chevron is sewn onto the left sleeve indicating membership in the Ministry of Internal Affairs of Russia, and on the right sleeve there is a chevron designating the service of a police/justice officer. You can add Velcro to the chevrons. The scarf is worn with the dress in a triangle folded into a scarf, the narrow ends are tied together and tucked into the back under the collar. The wide side is tucked inside under the neckline of the dress. It is allowed to wear a summer dress without a scarf in office premises. The length of the dress along the bottom edge should be at knee level. The Police/Justice dress with short sleeves is part of the new police uniform. Example of material pattern:

Semi-fitting dress in dark blue with a V-neck, decorated with a red silk scarf (included in the set). Fabric - gabardine. According to the order of the Ministry of Internal Affairs of Russia No. 575, chevrons are sewn onto the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. A chevron is sewn onto the left sleeve indicating membership in the Ministry of Internal Affairs of Russia, and on the right sleeve there is a chevron designating the service of a police/justice officer. You can add Velcro to the chevrons. The scarf is worn with the dress in a triangle folded into a scarf, the narrow ends are tied together and tucked into the back under the collar. The wide side is tucked inside under the neckline of the dress. It is allowed to wear a summer dress without a scarf in office premises. The length of the dress along the bottom edge should be at knee level. The Police/Justice dress with short sleeves is part of the new police uniform. Example of material drawing:

The Gorka-3 suit is the most successful and widespread type of Gorka suit. Made from 270g rip-stop material. per 1 m2, black, structurally consists of a jacket and trousers. Used to protect the fighter from adverse weather conditions, all-season. The main difference of this suit is the fleece lining. The jacket has a deep hood with drawstrings, two side welt pockets covered with flaps fastened with a button, one internal pocket for documents and two pockets on the sleeves, just below the shoulders. It is worth noting that the fleece lining is removable, which increases the usability of the suit and allows it to be used in a wider temperature range. The shoulders, elbows, and cuffs are reinforced with synthetic rip-stop Oxford fabric 0. The reinforcement on the elbows of the mountain suit-3 is made in the form of a Velcro pocket and is equipped with rigid inserts. The sleeves are equipped with anti-dust cuffs and a hidden elastic band for volume adjustment just above the wrist. The jacket is also equipped with an adjustable drawstring along the edge and fastens with buttons. The trousers of the slide suit have six pockets. Two side slots, two cargo slips and two rear ones. The knees, the bottom of the legs and other loaded areas of the trousers are reinforced with synthetic rip-stop Oxford fabric 0. The bottom of the legs is double, the so-called “boot”, reinforced with a cuff that fits over the boot and prevents dust, dirt and small stones from getting into it. Just below the knee, the trousers have a fastening elastic band. It automatically adjusts the volume of the trouser leg and prevents the fabric from sailing. The trousers are equipped with removable suspenders. Main features: removable fleece lining demi-season suit strong material internal pocket hood CHARACTERISTICS SUIT CHARACTERISTICS Material: ripstop Composition: 70/30 Density: 240 g. Linings: Oxford 0 Cuffs: yes Sealing elastic bands: yes Jacket/pants pockets: yes/yes Seasonality: demi-season Additional: reinforced inserts, removable fleece lining, dust boots on trousers, suspenders included

Thanks to innovative technologies and high-quality materials that provide maximum protection from rain and wind, you will be in constant comfort, which helps reduce fatigue throughout the day. Characteristics Protection from rain and wind Regular cut Upper material: Rip-stop Insulation: Thinsulate

The women's demi-season raincoat is part of the new uniform for police officers. The raincoat has a semi-fitting silhouette, with a central inner hidden fastener with five loops and buttons and an additional top button and a through-stitched loop, on an insulated stitched lining. On the yokes in the area of ​​the shoulder seams there are two belt loops and one non-slit loop for attaching removable shoulder straps. Sleeves are set-in, two-seam. Patches are sewn into the lower part of the middle seam of the sleeve, fastened with a loop and a uniform button. Turn-down collar, with a detachable stand. The removable belt is threaded into belt loops located in the side seams and fastened with a buckle with a tongue, the free end of which is threaded into the belt loop. On the right hem there is an internal welt pocket with a leaf. Jacket fabric (100% polyester) with rip-stop weaving threads and water-repellent impregnation. The second layer is the membrane. Filler: Thinsulate 100 g/m. Recommended temperature range: from +10°C to -12°C. Worn with a dark blue muffler or a white muffler. It is allowed to wear a demi-season raincoat neatly folded with the front side out on the left hand. Demi-season raincoats are worn buttoned up. It is allowed to wear demi-season raincoats with the top button undone. Demi-season raincoats are worn with or without removable insulation and a belt fastened with a buckle. This raincoat has removable dark blue shoulder straps and dark blue stripes.

Without Velcro under the chevrons. The size is indicated by the collar. You can use shoulder straps Worn untucked The belt is adjustable in size using side elastic bands 2 pockets on the chest Material: 65% Polyester 35% Viscose

The jacket is short, straight cut. Fabric - gabardine. Designed for employees of internal affairs bodies with special police ranks. According to Order No. 575 of the Russian Ministry of Internal Affairs, chevrons are sewn onto the sleeves of a suit at a distance of 8 cm from the edge of the shoulder. A chevron is sewn onto the left sleeve indicating membership in the Ministry of Internal Affairs of Russia, and on the right sleeve a chevron indicating the service of a police officer is sewn. You can add Velcro to the chevrons. Central closure with detachable zipper. Turn-down collar. Shelves with detachable yokes in the shoulder girdle area. On the shelves there are chest welt pockets with figured flaps with buttons. Two side welt pockets in a frame with a zippered entrance. Back with stitched yoke. There are soft folds along the yoke line for freedom of movement. The sleeves are set-in, single-seam, with stitched cuffs fastened with buttons. At the bottom of the jacket there is a one-piece belt, the volume of which is regulated by side sections with elastic braid. The back and shelf are lined with knitted fabric(net). The armholes are edged with edging braid. Straight-cut trousers. Stitched belt with six belt loops. The volume of the belt is regulated by side sections with elastic band. Two pockets in the side seams. One welt pocket with flap and internal button closure is located on the right rear half of the trousers. Red piping is inserted along the side seams of the trousers. It is part of the new police uniform. Example of material drawing:

Material: gabardine - Classic trousers with piping on the side seam. -The volume of the belt is adjusted by the side sections with elastic band. -On the belt-6 belt loops. -Two side pockets. -One welt pocket with a flap on the back half of the trousers. - Along the side seam - red piping Example of material pattern:

The model of lightweight demi-season boots with an upper made of high-strength hydrophobic leather and a rubber sole with a textured tread is invariably very popular among employees of various law enforcement agencies, tourists and people who prefer outdoor activities. For greater comfort, the lining of the boots is made of dense PVC mesh. The toe cap and heel are reinforced with a special thermoplastic material, which allows maintaining the external shape of the boots. The blind valve prevents foreign objects from entering the boot. Demi-season boots are equipped with a lacing system consisting of eight pairs of D-shaped half rings, which significantly facilitate and speed up the process of lacing and unlacing boots without removing the laces from the loops. CITY TYPE ASSAULT BOOTS Continuation of the legendary COBRA series. Used in all special units RF Combined upper: hydrophobic leather (1.2-1.4 mm), “DRYWALKSYSTEM” (R) (JSC “RUSSIAN LEATHER”) + elastic natural leather on the boot. Lining: mesh. Sole: rubber with increased wear resistance (Italy), BUTEK 1. Method of fixing the sole: adhesive. Toe and heel: reinforced thermoplastic material. Sizes: 40-46. The blind valve protects the foot from environmental influences (dust, water, dirt). Speed ​​lacing. Black color. Weight: 570 gr. Technical characteristics Assault boots. Model Cobra 12011 Manufacturer BUTEX Country Belarus Upper material hydrophobic leather (1.2-1.4 mm), “DRYWALK SYSTEM”® (JSC “RUSSIAN LEATHER”) + elastic natural leather on the ankle Lining material mesh Sole fastening adhesive Instep support metal Toe box and heel reinforced from thermoplastic material Sole material rubber with increased wear resistance BUTEK 1, (Italy) Available size range 40-46 Shoe color black Lacing type speed lacing Valve type blind valve

Border cap with a green top, black band and red edging. The cap is equipped with a cockade and a metallized filigree (or varnished) cord. Crown height -7 cm. Made within 3-5 working days.

Demi-season boots, in which the ankle boots and upper part of the vamp are made of nylon fabric with a density of 1000 D, and the lower part of the vamp is made of genuine chrome leather with a thickness of 1.6 mm, they are perfect for both employees of law enforcement and security units, as well as tourists or people who are fond of outdoor activities. The undoubted advantages of this model are that the front part of the boot is protected from mechanical damage and moisture by a “Matrix” leather lining and, in addition, the toe and heel are reinforced with a special thermoplastic material to maintain shape. The lining of this model is made of durable nylon mesh. The high lacing system securely fixes the model on the foot; in addition, the presence of three pairs of hooks in the upper part of the boot allows you to quickly lace up the boots. The blind valve prevents foreign objects from entering the boot. Flexible and durable rubber sole It is equipped with a large relief tread that provides optimal traction on a wide variety of surfaces, be it sand, gravel, rocks or grass. CITY TYPE ASSAULT BOOTS This model is a classic “tactical” police boot. Has been tested in many special units of Russia. Received the highest ratings for such indicators as wear resistance and comfort from the BULAT SOBR staff. Combined upper: genuine chrome leather (1.4-1.6) + high-strength fabric made from non-textured 1680D nylon thread. Lining: laminated mesh Sole: rubber with increased wear resistance (Italy), BUTEK 1. Method of fixing the sole: adhesive. Arch support: metal. Toe and heel: reinforced thermoplastic material. Sizes: 40-46. The blind valve protects the foot from environmental influences (dust, dirt). Black color. The toe part is reinforced - leather with high-strength PU coating "Matrix" (Italy). Weight: 545 gr. Technical characteristics Assault boots. Model Viper 2331 Manufacturer BUTEX Country Belarus Upper material natural chrome leather (1.4-1.6) + high-strength nylon fabric 1680D Lining material laminated mesh Sole fastening adhesive Instep support metal Toe and heel reinforced from thermoplastic material Sole material rubber of increased wear resistance BUTEK 1, (Italy) Available size range 40-46 Shoe color black Valve type blind valve Protection with linings made of high-strength leather “Matrix” with PU coating (Italy). toe part

The combat suit offered for purchase is an almost complete copy of the ACU suit that the US Army has been using since 2005. In a very short time, it has become so popular that it is used by both elite military units and fans of military sports games such as airsoft. The suit is made of high-quality cotton/polyester/35 blend fabric with a density of 210 g. on 1m2, in the colors of the experimental A-TACS FG camouflage, which is used by a variety of private military companies. The suit consists of a jacket and trousers. The jacket is fitted, so it is more convenient to wear it tucked into trousers with hanging equipment. There is a special fold in the area of ​​the shoulder blades for greater hand mobility. The central fastener is a two-way “zipper”, duplicated by a flap with Velcro fasteners, two oblique flat pockets on the chest are intended only for carrying documents, two patch pockets on the sleeves are used for the little things necessary for a soldier. There is a pocket for three ballpoint pens on the left forearm. For the convenience of wearing a bulletproof vest, the collar of the jacket is made with a stand-up collar so that the equipment does not rub the neck. It is fastened with a textile fastener. It should be noted that, unlike the original, the infrared marker mounts have been removed from the jacket, and the textile fasteners on the collar are softer and more comfortable. The sleeves of the jacket are secured with a Velcro fastener. The jacket has seven fastenings for information about the fighter’s rank, blood type, etc. The elbow reinforcements are made in the form of a pocket, with the possibility of equipping them with a rigid insert. The trousers are loose-fitting, with wide belt loops, and an additional tightening of the belt with a thin cord. The fly of the trousers is fastened with buttons, and there are belt loops on the sides of the waist for tightening, which is also not present in the original form. There are eight pockets in the uniform trousers. Two large cargo bags can accommodate additional ammunition if necessary, two small pockets on the calves are ideal for carrying a multi-tool and a dressing bag, access to them in a sitting position is easier than any other. All pockets on the trousers, except the mortise ones, are covered with flaps. Two side mortise pockets are traditionally used for household small items, and the two rear ones remain “in reserve”. The loaded parts of the trousers are reinforced; a rigid insert is provided in the front and on the knees. The bottom of the legs is tightened with a thin braid. color A-TACS FG Main features: analogue of the NATO suit, IR Velcro mark on the collar has been removed, softer than the original soft fabric on the trousers there are tightening belt loops CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: mixed (luxury) Composition: 70PE / 30 cotton Density: 270 gr. Cuffs: Velcro Sealing elastic bands: no Jacket/trouser pockets: slanted pockets on the chest Seasonality: all-season Additional: copy of the NATO suit

Winter boots Riot police, in which high (24 cm) boots are made of genuine chrome leather 1.6 mm thick, with a flexible thermoplastic sole, equipped with a large relief tread and insulation made of high-quality natural sheepskin - these are exactly the shoes that are necessary for law enforcement officers, professional tourists and everyone who enjoys outdoor activities. The toe box and heel of the boot are reinforced with thermoplastic material to maintain shape. This model uses a lacing system, in the upper part of which there are two pairs of metal loops, allowing you to quickly remove and put on the boots without removing the laces from the loops. The blind valve prevents dirt, snow, sand and other foreign objects from getting inside the boot. This model is a godsend for people with high arches. Upper: genuine chrome leather (1.4-1.6 mm). Lining: natural sheepskin. Sole: TEP (±40°C), 2050. Sole fastening method: adhesive stitching. Arch support: metal. Toe and heel: reinforced thermoplastic material. Sizes: 36-50. The blind valve protects the foot from environmental influences (dust, water, dirt). Hooks. Soft edging. Black color. Weight: 840 gr. Technical characteristics Army-type boots (Army boots). Model Omon 905 Manufacturer BUTEX Country Belarus Upper material natural chrome leather (1.4-1.6 mm) Lining material natural sheepskin Sole fastening with adhesive stitching Arch support metal Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C), 2050 Available size range 36- 50 Shoe color black Valve type blind valve Soft edging present Hooks present

Pilot winter boots with a low (18 cm) top and elastic sole made of a polymer material with rubber properties (TEP) - perfect for outdoor activities, as work shoes and long walks. The upper of this model is made of genuine chrome leather with a thickness of 1.6 mm, and natural sheepskin fur is used as insulation. The toe and heel parts of the boot are reinforced with a special thermoplastic material to maintain their shape. The sole is equipped with a textured tread that provides reliable grip on any surface. To prevent snow and foreign objects from getting inside the boot, Pilot boots are equipped with a semi-blind valve. For greater reliability, the sole in this model is stitched around the perimeter, and the lower part of the boot is attached to the vamp with a metal rivet. HIGH-HIGH BOOTS Upper: genuine chrome leather (1.4-1.6 mm) Lining: natural sheepskin. Sole: TEP (±40°C), 3521. Sole fastening method: adhesive stitching. Arch support: metal Toe and heel: reinforced from thermoplastic material. Sizes: 36-50. Semi-blind valve. Soft edging. Color: black Weight: 730 gr. Modifications: Model 180 faux fur. Technical characteristics Boots. Model Pilot 181 Manufacturer BUTEX Country Belarus Upper material natural chrome leather (1.4-1.6 mm) Lining material natural sheepskin Sole fastening with adhesive stitching Arch support metal Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C) 3521 Available size range 36-50 Shoe color black Valve type semi-blind valve Soft edging present

The size is indicated by the collar. Without Velcro under the chevrons. You can use shoulder straps Worn untucked The belt is adjustable in size using side elastic bands 2 pockets on the chest Material: 65% Polyester 35% Viscose

Patent No. 46636. Pants from a modernized version of the Soviet special forces jump suit known as "Mabuta". Recommended for security services Loose cut that does not restrict movement The suit uses stainless steel buttons High waistband for comfort and ease of carrying equipment on a belt. The sides of the belt are rubberized Belt loops for a wide waist belt Reinforcing pads on the knees Folds in the knee area for an anatomical cut Fly with a zipper The belt is fastened with two buttons The bottom of the trousers is rubberized, with anthers made of thin cotton calico sewn inside. The anthers are equipped with elastic straps. It is recommended to tuck the boots into the shoes and wear the trouser leg over the boots. Pockets: pockets on the front of the thighs with an entrance at the top with two buttons. The entrance of the pockets is bent to protect small contents from falling out; a rear mortise pocket on the right side with two buttons on the right trouser leg; a side pocket for a sling cutter or bayonet knife. The pocket has a rubberized entrance and a flap with two buttons. A sling is sewn inside, forming cells for self-attaching the sheath; side mortise pockets; Material: “Rip-stop”: 53% cotton; 47% polyester "Gretta": 53% cotton; 47% polyester "Standard": 60% cotton; 40% polyester Product weight: 46/176 size -589 g 50/176 size -654 g 54/182 size -690 g 58/188 size -703 g SIZE SELECTION: Download the size chart (. xls) to accurately determine the required size REVIEWS: Review from tankist_sssr YOU MAY BE INTERESTED IN:

A summer suit consists of a jacket and trousers. Straight-cut jacket. The collar is a stand-up collar, the volume is regulated by a patch on a textile fastener. The central fastener has a detachable zipper closed with a flap with textile fasteners. Two chest patch pockets with flaps and textile fasteners. The pockets are located obliquely, along the direction of the hand. Back with two vertical folds for freedom of movement in the shoulder blade area. Single-seam sleeves. In the upper part of the sleeves there are patch volume pockets with flaps with textile fasteners, with belt loops on the inside of the flaps. In the elbow area there are reinforcement pads with an entrance for protectors with textile fasteners. At the bottom of the sleeves there are patch pockets for pens. At the bottom of the sleeves there are cuffs with textile fasteners to adjust the volume. Straight cut trousers. The belt is solid with seven belt loops. The volume of the belt is adjusted with a cord with tips. Button closure. Two side welt pockets. Along the side seams there are two large patch pockets with three folds for volume. The upper part of the pockets is tightened with an elastic cord with a lock. The entrances to the pockets, designed obliquely to resemble the hand, are closed with flaps with textile fasteners. In the knee area there are reinforcement pads with an input for protectors with textile fasteners. At the bottom of the trousers there are patch pockets with flaps with textile fasteners. The volume at the bottom of the trousers is adjustable with tape. On the back halves of the trousers there are two welt pockets with flaps with a secret button fastening. In the seat area there is a reinforced overlay Fabric: Mirage-210, pe-67%, xl-33%

Classic model Loose fit Worn untucked You can use shoulder straps The belt is adjustable with side elastic bands 2 pockets on the chest Material: 67% Polyester 33% Viscose

Police officer trousers, women's, are intended for use in the summer. The model is made of fabric (gabardine) with good breathability, does not deform during use, is resistant to dirt, does not electrify and does not wrinkle. Uniform trousers with a classic straight cut with red piping along the side seam. The waistband is stitched, with a button, and is adjustable with an elastic band. Two side pockets. The trousers are fastened with a button, the codpiece is fastened with a zipper. For an optimal fit, there are pleats on the front and darts on the back halves. Example of material drawing:

The men's overalls are intended for pilots and technicians of civil and small aviation. The jumpsuit fits the figure well. The wear life of the product is increased thanks to high-quality domestic materials, design solutions and many years of experience of specialists. The product is developed in accordance with GOST 12.4.100-80. Overalls with a central fastener with a two-way zipper; internal wind flap; shoulder pads; in area armpits ventilation holes are placed, inside the ventilation holes are closed with a mesh in the color of the fabric. The width of the overalls along the waist line is adjusted using an elastic band (elastic band) on a contact tape (Velcro). There are zipper slits in the side seams; The bottom of the overalls has zippers for wearing over shoes. Pockets for various purposes: patch pockets with an inclined entrance with a zipper on the shelves, on the left sleeve - a patch pocket with a zipper with a flap fastened with contact tape (Velcro); it has a pocket for pens with three compartments, lower patch pockets with a zipper, and on the right rear half of the overalls there is a pocket for tools, fastened with a button; which is adjusted to the reinforcement part. To secure the tools, a cord is provided, which is attached to the pocket through a grommet and a holder with a half ring. On the right shelf there is a mating part of the contact tape (soft) for placing a flight chevron, on the left shelf there is a mating part of the contact tape (soft) for placing a standard name chevron, a belt loop for a badge. Back with vertical folds for freedom of movement. The sleeves are set-in, single-seam, the bottom is adjusted using a tab on a contact tape (Velcro). Above the pocket on the left sleeve, a counter part of the contact tape (soft) is adjusted to accommodate the chevron.

Lightweight UIS trousers provide comfort when working in hot weather. The "Gabardine" material does not wrinkle, does not lose shape when washed, and does not fade. Ideal for daily wear. CHARACTERISTICS Regular cut MATERIALS Gabardine (100% polye)

Description: Jacket MPA-02 with windproof strip and chin strap, removable insulating jacket and hood. Stand collar. In front of the seam along the waistline, the upper parts of the front with vertically located welt pockets with a zipper and patch volume pockets with flaps fastened with a loop and a “Canadian” button. On the lower parts of the front there are patch volume pockets with flaps fastened with a loop and a “Canadian” button. Back with stitched lower part. The volume of the jacket at the waist is adjusted by a set-in drawstring with a cord. The ends of the cord are brought out through the clamps. The sleeves are one-piece with front and back sides, two-seam with patties at the bottom, for adjusting the width using a textile fastener. The sleeves have patch pockets with a zipper, which is hidden. Hood with visor and drawstring to regulate the volume of the hood. The front cutout is tightened with a cord, the ends of which are brought out through eyelets; the length of the cord is adjusted with clamps. Along the shoulder seams there are belt loops for shoulder straps. Shoulder straps and false shoulder straps are removable. The removable jacket (underlay) is fastened to the jacket with a zipper along the edges of the sides and neck, as well as with elastic cord loops and buttons along the seam of the knitted cuffs. The removable lining is made of double-sided quilted fabric. Single-seam set-in sleeves with stitched knitted cuffs. On the inside left side of the removable jacket there is a stitched patch pocket with a textile fastener and a pocket made of the main fabric. Insulation: "Fibersoft" A unique product, indispensable in extreme conditions, with large physical activity. Replaces several layers of clothing, combining wind and moisture protection and an insulating layer. Thanks to the one-piece sleeves, it provides unlimited freedom of movement and reduces fatigue. A removable jacket (lining) allows you to provide comfort during sudden changes in external temperatures: day-night, high altitudes. A large number of different pockets (volume patch pockets, welt pockets) are convenient for storing all kinds of equipment. It is recommended to use in combination with thermal underwear. Temperature range from +10ºС to 0ºС.

The police shirt is made of polyester-viscose fabric. Thanks to this fabric, the shirt will last longer, will not lose its original appearance even after numerous washes, and will not electrify. CHARACTERISTICS For hot weather Regular cut MATERIALS 65% polye, 35% viscose

Material: wool mixture - Classic trousers with piping on the side seam. -There are 6 belt loops on the belt. -Two side pockets. -One welt pocket with a flap on the back half of the trousers. - Along the side seam - red piping

The advantage of the MPA-56 trousers is their impressive versatility: there are a large number of pockets, the Molle system and reinforcing linings in the seat seam area. Thanks to the anatomical cut, you are provided with maximum freedom of movement. CHARACTERISTICS For hot weather For intense use For active recreation For military operations MATERIALS Rip-stop

Winter jacket for the ground forces, navy and air force reliably protects against wind and snow. The insulation retains heat well, weighs little, does not deform, and does not absorb moisture. The combination of membrane fabric and insulation provides protection from severe frosts. CHARACTERISTICS Cold protection Regular cut For military operations Hand wash only MATERIALS Rip-stop Membrane Fibersoft insulation

OMON winter boots, in which high (24 cm) boots are made of genuine chrome leather 1.6 mm thick, with a flexible thermoplastic sole, equipped with a large relief tread and insulation made of high-quality printed wool fur containing (70%) sheepskin - this is exactly those shoes that are necessary for law enforcement officers, professional tourists and everyone who is interested in outdoor activities. The toe box and heel of the boot are reinforced with thermoplastic material to maintain shape. This model uses a lacing system, in the upper part of which there are two pairs of metal loops, allowing you to quickly remove and put on the boots without removing the laces from the loops. The blind valve prevents dirt, snow, sand and other foreign objects from getting inside the boot. This model is a godsend for people with high arches. For greater comfort, in this model the toe and heel of the sole are raised, which makes walking more comfortable. Upper: genuine chrome leather (1.4-1.6 mm) Lining: printed woolen fur Sole fastening method: glue-stitched Instep support: metal Toe and heel: reinforced from thermoplastic material Sole: TEP (±40°C) 2050 Size: 36-50 Color: black . Weight: 840 g The blind valve protects the foot from environmental influences (dust, water, dirt). Hooks. Soft edging. Technical characteristics Army-type boots (Army boots). Model Omon 907 Manufacturer BUTEX Country Belarus Upper material natural chrome leather (1.4-1.6 mm) Lining material printed wool fur (merino) Sole fastening with adhesive stitching Arch support metal Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C), 2050 Available size range 36-50 Shoe color black Valve type blind valve Soft edging present Hooks present

Summer pants The MES are incredibly comfortable thanks to the light and smooth Gabardine fabric, which is ideal for hot weather. The product does not fade in the sun, does not shrink after repeated washing, and does not wrinkle. CHARACTERISTICS For hot weather Regular cut MATERIALS Gabardine (100% polye) Example of material pattern:

Ministry of Defense cap (office). The cap is made of ripstop fabric, olive color. According to temporary regulations No. 256/41/3101. On caps and caps there is a sign of distinction according to affiliation with executive authorities, where the law provides military service(golden-colored cockade), senior officers, in addition, have a visor and cap band with golden-colored embroidery.

Police windbreaker. This statutory police windbreaker thanks to the use of high-quality membrane fabric with a density of 240 g. will be able to protect employees of the Ministry of Internal Affairs from any adverse weather conditions. A big feature of this jacket model is its resistance to wind gusts and moisture resistance. Inside the stand-up collar there is a hood, which can be easily adjusted along the front. Elasticated cuffs, an adjustable waistband, and a durable zipper hidden by a fabric strip with rivets will also provide protection from bad weather. Along the perimeter of the shoulder girdle, the product is complemented by sewn-in red piping. On the shoulder seams there are shoulder straps on the button, intended for attaching distinctive signs. color dark blue main features: uniform MVD material membrane wide size grid CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: membrane Composition: P/E Density: 240 gr. Cuffs: yes Jacket/pants pockets: yes/no Seasonality: all-season Additional: statutory police windbreaker

A men's raincoat for employees of the Ministry of Defense with a straight silhouette will provide comfortable service and a presentable appearance at temperatures down to -15 degrees. Jacket fabric with a membrane in combination with insulation works as wind and moisture protection. CHARACTERISTICS Protection from cold Protection from rain and wind Regular cut Hand wash only MATERIALS Rip-stop Membrane Fibersoft insulation

Description: Suit for protection against harmful biological factors, recommended for work in field and taiga conditions - hood of complex design, completely eliminating the penetration of insects under clothing - mosquito net can be unfastened and stored in a secret pocket - hood with adjustable volume - patch pocket with Velcro flaps – sleeves with knitted wrist cuffs – reinforcements in the elbows and knees – volume adjustment at the bottom of the jacket and the bottom of the trousers – trouser waistband with double elastic band Colour: KMF reed Materials: Mixed fabric Standard: TU 8572-003-72179571-2012 Height: 170 -176, 182-188 Size: from 88-92 to 120-124 Volume 1 unit. 0.005 (m3) Quantity of goods per package: Packaging of 5 pieces Volume of 1 package: 0.024 (m3) Certificates:

The MPA-35 suit is designed for comfortable work of Ministry of Defense employees in hot weather. Consists of trousers and a jacket with long sleeves. The sleeves have reinforced pads in the elbow area. The bottom of the jacket is adjustable in volume. CHARACTERISTICS For hot weather Regular cut For work in the headquarters MATERIALS Gabardine (100% polye)

The MPA-35 suit is designed for comfortable work of Ministry of Defense employees in hot weather. Consists of trousers and a jacket with long sleeves. The sleeves have reinforced pads in the elbow area. The bottom of the jacket is adjustable in volume. CHARACTERISTICS For hot weather Regular cut For work in the headquarters MATERIALS Gabardine (100% polye)

Casual suit for military personnel of the Russian Defense Ministry. Men's jacket: fastened at the waist with a zipper, with long sleeves, without lining. Turn-down collar with a stand-up collar and fastening of the corners with buttons. The pockets are fastened with contact tape. Below there are welt pockets “frame”, fastened with a zipper. The internal pocket for documents is fastened with a button. Trousers with a stitched belt fastened with a button. Color: Blue, green, black. Size: 88-132 Size: 84-100 Height: 158-200 Fabric: Rip-stop Fittings: Reinforced Color: blue, green, black. Material: rip-stop.

The Soft Shell suit is purposefully designed to meet the stringent requirements of Special Forces operators. Designed to maintain a comfortable body temperature for the user during the cold season during vigorous activity, in bad weather, in wind and rain. The suit can be used as the base 5th layer of ECWCS Gen.III. MPA-28 trousers: -2 side patch pockets with Velcro flaps; - the side sections of the belt are tied with an elastic band; - along the bottom of the side seams - “zippers”; - perforated elastic band for attaching to shoes. Soft shell fabric breathes, does not tear, does not get wet, and does not restrict movement!

The staff suit consists of trousers and a shirt with short sleeves, made of lightweight fabric that does not wrinkle, does not fade and does not lose its shape even after numerous washes.

LOW BOOTS Upper: genuine chrome leather (1.4-1.6 mm). Lining: non-woven, abrasion-resistant and quick-drying, high density (150g/m2) Sole: TPE "FASHION" (±40°C), 112. Method of fixing the sole: adhesive stitching. Arch support: metal. Toe and heel: reinforced thermoplastic material. Sizes: 40-46. Black color. Weight: 495 gr. Technical characteristics of low shoes. Model Inspector 704 Manufacturer BUTEX Country Belarus Upper material natural chrome leather (1.4-1.6 mm) Lining material hygroscopic and wear-resistant fabric (150 g/m2) Sole fastening with adhesive stitching Instep support metal Toe and heel reinforced from thermoplastic material Sole material TEP (±40°C ) “FASHION”, 112 Available sizes 36-46 Shoe color black

Warm and durable winter jacket. The most popular model. The website presents a plain version of this jacket. You can use false shoulder straps Quilted polyester lining together with padding polyester, which increases the service life of the clothing (the padding polyester stays in place during dry cleaning or washing) Front zipper with two locks, unfastens both at the top and bottom of the jacket Folds on the back to give additional freedom of movement Windproof flap covering the front zipper, knitted cuffs inside the sleeves prevent the cold from penetrating under the clothes. Stainless steel buttons are used. It is possible to complete the jacket with a hood, collar and lining. Pockets: 2 breast, 2 at the bottom of the jacket and 1 internal. Drawstrings: cord for tightening the belt and bottom of the jacket. Material: Oxford. ) -100% nylon with PU coating Insulation: Synthetic winterizer 300 g/m 2 SIZE SELECTION: Download