A simple way to knit a fashionable earflap hat. Wardrobe crochet hat with earflaps for boys yarn Children's hat with earflaps crocheted

My son needed a hat for the winter. Dad categorically said that it should be a boy’s style, earflaps, for example, and without any pom-poms. I had to think and this is the result of my thoughts and labors.
I used Richard Simon PAULA 100% polyester yarn (50 g/115 m) for the bottom hat (it took a little more than one skein), for the top hat VITA Scarlett (49% wool, 51% acrylic; 100 g/225 m) it also took a little more one skein. Hook No. 3.5, age 2 years, head circumference 48 cm.
I selected the color scheme to match the winter suit.

First, I knitted the bottom hat without ears according to the size of my head. I knitted according to the general principle of crocheting hats, using single crochets. First, a circle with a diameter equal to the exhaust gas divided by 3. Then straight without increments to the desired depth of the cap. Then, having put the hat on my son, I measured the circumference of his head, it turned out to be 4 cm larger than without a hat. This means that the top hat needs to be knitted based on this, for a head circumference of 52 cm. The top cap stretches well, so I reduced the diameter of the bottom by 1 cm.

The top cap is knitted with embossed double crochets; the pattern is obtained by alternating knit and purl stitches. I have already made a description for a similar hat with a slightly more complex pattern. Here
The main thing is to understand the principle. Eight wedges, alternating knit stitches and purl stitches, making increases according to the rules of knitting a circle to the bottom diameter we need. Then we knit straight, alternating a series of strips of embossed knit and purl double crochets to the desired depth of the cap. I measured it for the bottom hat on my son.

Then, again during fitting, we mark on the top hat the location of the ears and the lapel in the center. We knit them in single crochets, first on the top hat. Immediately, without breaking the thread, we make ties, a chain of air loops, then we use connecting posts to return back along this chain, break the thread, and hide the tails.
Then we knit the ears and lapel on the bottom hat, making them a little larger than the top ones, literally one loop from each edge. Always checking the position with the top cap, keep in mind that the top cap stretches very well due to the pattern.

When the ears and lapel are ready, we tie the entire bottom hat around the edge with double crochets. In places where there will be corners (connection of the ears, lapel and main fabric, corners of the lapel and ears), we knit 3 double crochets from one loop. And carefully sew the bottom hat to the top one, bending the bottom hat slightly onto the top one, it will fit well due to the binding. Thread the ties between the double crochets of the bottom hat. Sew the lapel to the hat.
The hat turned out to be very cozy and warm. My son enjoys dressing it up.

Hats with ears are very popular today. They are worn by children, men and women. It is quite easy to knit and comfortable to wear. Ushanka hat is practical and warm.

Here are diagrams with descriptions of the simplest products for the whole family.

The men's model is distinguished by the absence of decorations and unnecessary elements. Beginning needlewomen should start with this one. Needlewomen always start learning with the simplest option.
To make a hat, we will need yarn - approximately 100g and straight knitting needles No. 4.

Main drawing. We will work with knitting needles using the most common pattern - garter stitch. If you are already familiar with this drawing.

Step-by-step photo of MK knitting a hat with earflaps

The most difficult part of a hat is the top or bottom.

The man's hat is almost ready - all that remains is to sew it.
To sew the hat we use a hook. If you know how to crochet the edges of a product, then use the crab step technique. This will give the product neatness and completeness.

Video: Knitting a unisex earflap hat

Beautiful and warm model for women

Women are also not averse to adding earflaps to their wardrobe. Women's clothing is not so restrained in its elements; for example, you can use imitation fur for decoration. Materials for work. We will need thick yarn and large knitting needles - No. 7. You will also have to buy a fur ribbon for decoration.

Progress:

A product for women is nowhere without decent jewelry. Use a strip of fur ribbon you have saved for this and the knitted hat is ready.

Video: Ushanka hat with lapels

Fluffy hat for girls

In the photo there is a hat with earflaps for a girl, in which “Travka” yarn is used for finishing.
A children's hat begins with the calculation of the loops. Their total number should be divided by 4, plus 4 pcs. The main pattern is double elastic. Knitting from the cast-on row to the beginning of the formation of the crown continues with this particular pattern.

When there are 5-7 cm left to the end, we put marks and divide the canvas into 4 parts.

From each division loop we make decreases before and after.

We knit 3 stitches together through a row. You should now have 4 wedges. The base is ready.

Now we turn it over and from the bottom side, in those places where the ears and visor should be, we collect loops.

The size of the visor and ears depends on your preferences and the size of your child's head. Of course, any master will not forget to round them to the bottom.

The earflaps look just great. You can appreciate this in the photo above. If the ears will be tied at the top, sew on the laces.

Video: Step-by-step tutorial on knitting earflaps

Stylish and fashionable earflaps model for boys

For a boy, we choose darker threads; various braids can be used as designs.
If you don't know how to knit braids, here's a diagram. These braids are perfect for both boys and girls.
The master class begins with lace ties. You can get two absolutely identical parts only by working with two skeins of yarn. This pattern for boys involves the use of circular knitting needles.

When the ears are ready, make a set of loops between the threads for the frontal (+ 40 pcs.) and occipital parts (+ 20 pcs.).
There is no visor in the circuit, so the task is simplified. Continue knitting in the round with an elastic band 2*2 - approximately 5 cm in height.
After the elastic band, move on to the braid pattern. Depending on the volume of the boy’s head, rapport will have to be repeated 8-9 times. The master can easily navigate the dimensions.
Decrease according to the general pattern, close the last stitches.

The product for the boy is ready.

Collection of MK photos with a description of knitting a hat with earflaps

A practical thing in winter is a knitted hat, a diagram and step-by-step manufacturing instructions for which will be presented in this article. A warm winter hat for a boy can be presented in several models, from which needlewomen have the opportunity to choose the one they like and knit it, focusing on the appropriate pattern. The main thing is to remember that such a product is knitted from wool or wool blend yarn, which retains heat well in frosty weather, and the hat itself must be knitted very tightly.

Crochet hat for a boy in the shape of a helmet

In order for the needlewoman to get an unusual and at the same time comfortable helmet hat, which every child will undoubtedly like, she will need to purchase thick yarn of several colors and a hook. The amount of yarn must be calculated according to the individual measurements and age of the child. In order to get acquainted with all the nuances of the work, it is worth watching a video with master classes on making such a model of a hat.

Crochet hat for a boy with ears: step-by-step master class

Before you begin the process of knitting a model of a hat with ears, you need to find out the circumference of the child’s head, since the height and width of the product depends on this, then purchase the required amount of yarn.

First you need to knit the base of the cap; this can be done in several ways. The simplest option is to knit rows in single crochet columns in a circle; the advantage of this method is that there is no seam. There are other methods, which are shown in the photo.

After the base of the hat is knitted according to the chosen pattern, you can proceed to knitting the ears. To do this, you need to knit the first, second and third rows as follows: one lifting loop and 14 single crochets. The fourth and fifth rows consist of one rise and decrease stitch, ten single crochet and decrease stitches. The sixth row is one lifting loop and ten single crochets. The seventh, eighth and ninth rows should be knitted according to the pattern: one lifting loop, at the beginning of the row make a decrease, single crochet and make a decrease at the end of the row, ties can be threaded into the remaining three loops. The second ear is knitted according to a similar pattern.

You can also decorate the hat with a design, for example, make an image of a boat. To do this, focusing on the diagram, you need to knit rows, changing the working thread of the corresponding color according to the picture.

A crocheted earflap hat is considered a convenient and practical model that can protect a child during even severe frosts or winds. This model of hat is knitted according to a standard pattern, but hat models can differ due to the color of the selected yarn or due to the pattern with which the hat can be decorated.

It’s always nice to buy new clothes for your child, and it’s even nicer to make them yourself. This article will talk about crocheted hats for boys.

In order to knit a hat for a child, you need to take measurements of his head circumference. They are listed by age in the table below.

Crochet hat for a boy for spring and autumn: description and diagram

Crochet beanie hat for a boy: description and diagram

Beanie hats are the most fashionable now, everyone wears them. To knit it, you do not need to measure the volume of your head, because... its main part is elastic. The knitting principle does not depend on the pattern. You will need 100 grams of wool blend yarn and a hook number 4.5. So, the scheme of work:

*drawing “Shells”

1st row: 12-14 ch. + 1 v.p. rise.
2nd row, etc.: st. b/n for the back half-loop, finish 1 ch. rise.
We turn over each new row.
As required, the length will be knitted, fold the 1st and last row, and knit it in half-columns. The number of rows must be a multiple of 6 minus 3.
We turn the product across and knit a row of st. b/n.
Then we begin to knit the pattern according to the pattern and continue until the 17th row.

Scheme of the “Shells” pattern

Boy's hat with crochet ears: description and diagram

Crochet Teddy Bear hat: diagram and description

Crochet hat and helmet for a boy: description and diagram

A helmet hat is convenient because it can replace both a hat and a scarf. Your baby will always be warm. The hat is knitted from wool yarn, mixed, merino or mohair yarn. To work, you need a No. 4 hook (or the one indicated in the recommendations for the selected yarn).

Knitting pattern (head circumference 44-48 cm):

Let's start from the top of the head:
1st row: 6 tbsp. we connect into a ring
2nd row: double the columns, each with 2 tbsp. b/n = 12 tbsp. b/n
3rd row: 18 st. b/n
4th row: 24 st. b/n
5th row: 30 st. b/n
6th row: 36 st. b/n
7th row: 42 st. b/n
8th row: 48 st. b/n
9th row: 54 st. b/n
as a result of the addition, you should get a circle with a diameter of 14-16 cm
Main part: knit another 13 rows of st. b/n, on the 22nd row we should have 54 sts left. b/n. We continue knitting until the product is 16 cm high.
Occipital part: skip 19-20 st. in the front, 35 st. remain.
23rd row: ch 1, remaining st. b/n;
24th row: 3 ch, 5 st. s/n, 25 tbsp. b/n, 5 tbsp. s/n;
knit 3-4 rows.
Throat: we return to the part of the product that covers the throat and in a new row on each side we add 5 vp. we knit a row of b/n columns. Makes 45 tbsp. b/n. We knit five rows. After this, in subsequent rows we double the number of stitches, knitting 2 tbsp. b/n in each. There will be more than 90 loops. Further knitting depends on the length you need.

Crochet hat with a muzzle for a boy: diagram

The hat with a muzzle is knitted from 100 grams of gray-white-black yarn, crochet number 7. The main pattern is single crochet.

We cast on a chain of 40 loops and close it in a circle with a connecting post. Further knitting will be in a spiral.
In a row, every 14 cm, we knit every 7th and 8th loop together. There should be 35 stitches at the end.
In the next row, we knit the 6th and 7th loops (30 loops).
Thus we decrease 4 more times, i.e. 4 rows for a total of 10 stitches.
We tighten 10 loops with a working thread.

Eyes: we make a ring from 8 tbsp. We start each circle with 1 additional ch. and finish with 1 connecting stitch. in the 1st art. b/n. In the 2nd round you need to knit 2 tbsp in each loop.

Nose: we knit a chain of 5 vp, tie it with st. b/n. In the 2nd and 3rd rows, decrease 1 stitch on each side. The nose is ready.

Ears: We measure 15 stitches along the front neckline of the cap and tie 9 loops on both sides of them with the main pattern. In the 3rd row, decrease 1 p on each side. After 7 rows of tying, leave the last 3 p untied.
For each ear we make a chain of 9 chain stitches and tie it with the main pattern.
After 2 r. from the initial one we decrease on both sides in every 2nd r. 1 p. each
After 7 r. from the initial one we leave the last 3 stitches untied.
We tie the rounding of the ears and the bottom edge of the cap with 1 p. of black thread. Art. b/n.

Assembly: sew on all the elements. The ears are as in the photo, inside the eyes we make eyeballs with white thread and embroider a mustache.

Crochet owl hat for a boy: description and diagram

An original and cheerful hat in the shape of an owl will make your child stand out and cheer him up. The knitting technique is simple. If you wear a hat in spring or early autumn, it is better to choose acrylic or cotton threads.

Crochet pilot's hat for a boy: description and diagram

In order to knit such a stylish hat, you need to take 50 grams of yarn of one color and 100 grams of another. You will also need fleece for the lining. We will knit with crochet number 4.

The number of wedges depends on the density of the yarn and the diameter of the child’s head circumference (the knitting example is designed for 8 wedges). Knitted in half columns (p/st)

1st row - 8 loops
2nd row - double each loop
3rd row and subsequent ones - double every 2nd, i.e. 8 stitches are added in each row

The process of adding loops continues until there are 72 loops. After this, we knit one row without increasing. Then add in a similar way to the desired diameter (+/- 80 loops). We knit to the required height.

Ears: to the left and right sides of the seam we count 24 loops and knit 2-3 rows on them. On both sides of the frontal part we count 16 loops, they will be the eye.
We knit as follows: on the front side we make an increase after the edge loop, on the back side we decrease it. 8 rows will be enough. We knit the desired length, you can make ties at the end or a strap on one ear and a button on the other.

Glasses: cut it out of a plastic bottle and use a hot needle to make holes at a distance of 0.5 cm. Tie it with a crochet hook. We sew the strap on the back of the head so that the glasses do not fly off.

We sew in a fleece lining and the hat is ready.

Crochet earflap hat for a boy: description and diagram

A hat with earflaps is a practical and comfortable model that will protect you from cold and wind in winter, and at the same time will be “to the liking” of any child. The knitting technique is simple, the complexity depends on the chosen pattern.
First you need to measure the size of the child's head, then purchase the required amount of yarn and a hook.
Yarn can be used Stay Wise, Yarn Art Angora Ram or Alize baby wool.

After the base is knitted, we move on to the ears. The distance between them should be 25 loops. For this:

1st, 2nd and 3rd row: 1 lifting loop and 14 st b/n
4th and 5-1 row: 1 stitch up and down, 10 st b/n and down
6th row: 1 lifting stitch and 10 st b/n
7th, 8th and 9th: 1 instep stitch, decrease at the beginning of the row, then 1 sc and decrease at the end of the row
At the end there will be 3 loops left through which you can thread ties.

Video. Minion hat for a boy

Crochet hats for boys: interesting ideas, step-by-step description.

The softest, most beautiful and warmest hat for a child is the one knitted by mother’s hands! With the advent of children, even those who previously knew about needlework only from rare craft lessons at school take up hooks and knitting needles to make a masterpiece for their baby.

This article is dedicated to knitted hats for boys. They can be roughly divided into demi-season and winter. Some of the hats are exclusively for demi-season or winter, but most of them are modified exclusively with the presence or absence of a fleece lining.

Which yarn to choose for knitting a hat for a boy?

When choosing yarn for a spring-autumn hat, you can recommend soft wool mixture or acrylic. If the child is under 3 years old, be sure to choose yarn marked “children’s” or “baby”.

Have you heard your child at least once complain that the hat “pricks”, do not think that the child does not want to wear it, most likely, his skin is sensitive and feels the tingling of the fur, choose pure acrylic for such kids.

For a winter hat with a thin lining, choose pure wool or angora. If the hat is knitted with a lining made of thick fleece, fur, or sheepskin, then the binding can be any yarn, even fancy yarn.

Crochet hat for a boy for spring and autumn: diagram and description

A creative mother, having gone shopping and familiarized herself with the assortment, will definitely want to buy a skein of yarn and independently knit the most gorgeous headdress for her child. We propose to create a “Minion” hat for autumn walks in just one evening. Also, by slightly modifying the hat, you can knit it for cold autumn, or even winter, by making a lining of fleece or sheepskin.

Minion hat

For knitting, we need a skein of yellow baby yarn, half a skein of blue, a little white and black, and also gray. For the perfect combination, we recommend choosing yarn of the same composition, thickness and weave.

Work process

We take yellow yarn in our hands. We knit the first three air loops, connect them to the first air loop, not tightened too tightly. A ring is formed.

The next row of 14 double crochets and the last column are connected to the previous one with a tightly tightened air loop.

We knit the third row according to this principle - 1 double crochet, 2 double crochets from one loop, 2 double crochets and again 2 double crochets from one loop. So until the end of the row. When knitting, you get an even circle without a bulge on one side.

We knit the fourth row according to the same principle. If a cone begins to form due to wide or tight loops, unravel the row and knit, adding more loops or, on the contrary, making a greater distance between additions.

In subsequent rows we add one column at a time in this way: 2 double crochets from one loop, 4 double crochets and repeat. Be sure to lay out the knitting after each row and check that the bottom does not become a cone.

We knit the sixth row without adding. This is a size for 3-4 years. Try it on your child's hat that fits him just right. If the child is younger, you need to stop adding loops on the 4-5th row, if older or the hat has a lining, then stop adding on the 7-10th row.

We knit the seventh row with black threads, double crochets without adding anything.

We knit the eighth row with yellow threads and continue to knit the next 4 rows.

We tie the blue thread to the yellow thread as tightly as possible to the knitting, we will not use it anymore. Next we knit a row of double crochets in blue.

The next row is blue single crochet.

Having finished the last row, we knit the “ears”. Turn the knitting and knit 14 single crochets in the opposite direction.

We knit in the opposite direction, also in single crochets, cutting off the first and last loops. We knit this way until the last loop remains, tighten it and secure the thread.

On the other side we knit the second “eye”. Calculating the location is quite simple. Put the hat on the child so that one ear is in place.
With a knitting marker, mark the same place on the other side. This is the easiest way to correctly calculate the beginning of knitting the second part of the hat with ears.

We tie a knot as in the photo and knit the first loop. We continue in exactly the same way as in the previous paragraph. Tighten the last loop and thread all visible threads.
We tie the entire hat. If you want a soft elastic edge - single crochet, if you want an elastic edge - knit in a crab step.

In the center of the “ears” you knit small loops as in the photo.

Let's move on to the minion's eye. We knit 3 air loops with black threads and connect them into a circle.

As at the beginning of knitting the bottom, we knit 14 double crochets.

The next row is single crochet with white thread. We add every 3rd loop.

The last row is also single crochet with gray thread. No need to add.

Using gray thread and a needle, sew the eyes with a large eye to the hat at the level of the black stripe (as in the photo).

We cut off 6-10 black threads 15-20 cm long. We tighten it to the center of the bottom and secure it as in the photo. Additionally, we tie a bun of hair into a tight knot and tousle it a little.

We embroider a smile with black thread.

Remember, there are still loops on the “ears”; you can attach buboes, ties or just buttons to them if desired.

The Minion hat is ready!

Crochet Minion hat

What could be warmer than a hat with earflaps? Warm lining to prevent your ears from blowing, and winter walks are a joy!

To work, you will need two colors of yarn: for the base and finishing. For finishing, “grass”, “velor” and other fancy yarns are perfect.

If the circle is ready 52 cm, the bottom should be 16.50 cm. For another circle, we calculate using the formula C = 2πR = πD, where C is the circumference, R is the radius, D is the diameter, π is the constant Pi (3.14).

We knit according to the pattern below.

By knitting according to the pattern, you will get an almost finished hat. Next, we divide it so that the seam of the transition from column to column is at the back of the head. We leave 24 loops in front and at the back of the head untouched, 18 loops per “ears”. We switch from circular knitting to knit and purl.

In order for the bevels to be neat, there is no need to shorten the loops. It is enough not to knit an air loop, but to immediately begin knitting the next column. Such a smooth transition will create neatness of work. We close the last loops as in the photo.

We knit according to the pattern.

Having tied the back of the head, we completely move on to tying the “ears”. We knit row by row, constantly smoothing the ends on both sides. When tying, we break the thread and thread it.

In our case, we tie the hat with grass around the perimeter, starting from one of the corners of the visor. Having finished knitting in a circle, we begin to knit the visor. We knit 6-10 rows in single crochets as desired and sew them to the hat.

We knit the ties and sew them to the hat. Carefully sew on the lining and the hat is ready!

Crochet hat and helmet for a boy: diagram and description

The best option for a winter hat is a model called “Helmet”. This hat is great for fidgety boys, since with it there is no risk that the baby, when he turns, will expose his ear, neck, forehead, and especially the back of his head. For the winter version, a lining is required. It can be fils, with artificial or natural fur, and sometimes a padding polyester padding with a cotton base is sewn in.

If you decide to knit a helmet hat with a lining, the yarn composition can be anything, even 100% synthetic. But the threads should be soft and pleasant to the body, since in some places (forehead, neck) it touches and can cause discomfort.

Let's get started

The knitting should be tight so that the lining is not visible through it. If there are holes, knit tighter or use a smaller crochet hook. This pattern is designed for a head volume of 46 cm.

According to the above pattern, we knit a circle. In this model, the bottom should not be flat, but slightly convex, like the helmet of a brave knight.

Please note that there are 12 rows in the diagram. You may need more or less, depending on the thickness of the yarn and the desired size.

After the bottom we knit another 10-14 rows in single crochet columns. You can check the correct size by trying the hat on the future model. Don't forget that you plan to insert a lining, so the hat should be a little large and fit over your eyes. With the lining everything will fall into place. In our case, it is knitted 16 cm in height. We break the thread, do not thread it.

If you knit everything according to the pattern, you get 54 columns in a circle. Otherwise, calculate proportionally to our scheme. We continue to leave 19 columns untouched, for the rest we continue to knit in single crochet columns. Even if everything seems the same now, we recommend leaving the transition from one row to another strictly at the back of the head. (The thread we broke).

We need to add a little bit. So, having knitted the first row of 35 single crochets, we turn the knitting and knit: 5 double crochets, 5 double crochets from one loop, 15 single crochets, 5 double crochets from one loop, 5 double crochets.

We knit 2 more rows in the same way as the previous row.

Add 5 air loops on both sides and knit 45 single crochets.

Next row: 1 chain stitch, 2 single crochets, 2 single crochets in one loop, repeat until the end of the row.

4 rows of 45 single crochets.
We increase the 33rd row: 3 air loops and from each loop we knit 2 double crochets. It turns out that at the end of the row there is an accordion with 90 loops.
34 row: from one loop we knit 3 double crochets, then 88 double crochets, the last loop also 3 double crochets.
The last row is all single crochets.

We tie it in single crochet columns around the entire perimeter of the hat. If desired, you can tighten it a little with a crawfish step.

We knit “ears for the crown”. We cast on 3 air loops, connect and knit 14 double crochets in a circle. We do not close the next row, which also closes the single crochet columns or the cross stitch, to the place of sewing. To prevent the ears from dangling, 1/3 should be sewn to the hat.

Sew on the buttons and tighten the threads. The hat is ready!

Video: Crochet beanie hat for a boy: diagram and description

Crochet hat with a muzzle for a boy: diagram

Funny hats are becoming more and more part of children's fashion. We offer to create a unique fox hat for your little hero in just one evening.

We will need red yarn, as well as leftover white and black yarn.

We collect 3 air loops and connect them into a single ring. We knit the entire stitch with double crochets, so we won’t mention it during the process. We knit the first row 15 columns. We divide them into 3 equal parts and mark them with markers, which we will then rearrange each time until the pattern is clearly defined. So, we knit the columns and in three places where the markers we knit 2 columns from one loop. It turns out to be a cap that expands towards the bottom in 3 places.

The hat should be elastic and easy to put on the baby.

Without knitting row 2 to the end, add white yarn to the front. We leave 19 loops in the front under the white yarn, in the middle we knit 3 columns from one loop. Repeat the second row.

The hat is almost ready, all that remains is to tie it in a circle with white thread.

We knit the ears. We cast on 8 chain loops and use red threads to knit 8 single crochets. Next row we cut the first and last loops and switch to white yarn. We tighten the last loops. We tie it around the outer edge with red yarn and sew it to the hat.

From black threads we cast on three air loops, connect and knit 10-14 single crochets. It turns out a nose and eyes. Sew the nose on white in the center. But it’s worth playing with the eyes, moving them towards the center and along the edges. This way you will select the optimal facial expression (stupid, funny, sad, etc.).

Tighten the threads and the hat is ready!

Video: Crochet hat and scarf for a boy: diagram and description

Crochet owl hat for a boy: diagram and description

Owls have conquered the Internet, and with it young mothers. More and more often on the streets you can see a child wearing an owl hat. And just as there is not a single similar bird in nature, so the caps are full of variety. We also offer you a pattern with a step-by-step description for crocheting an owl hat.

For the hat you will need a skein of purple and brown yarn (colors can be changed as desired), as well as a little white, olive (you can also make eyes of a different color, just natural), and orange-brown for the beak. And black buttons/rhinestones for the eyes.

Below is a diagram and description of knitting, describing the work process in detail. You can experiment with colors and thread structure, creating more and more variations of the already famous hat.

Boy's hat with crochet ears: diagram and description

For warm spring or autumn, you also need an interesting, but lightweight hat. We suggest knitting a cotton panda hat, which evokes affection no less than an owl, a minion and other funny animals. For work you will need white and black cotton. Two large white and small black buttons.

Crochet hat for a boy with ears: step 2

4th row: double crochets.
5th row: 2 double crochets, 2 double crochets from one loop and so on until the end of the row.
Row 6: double crochets.
7th row: 2 double crochets, 2 double crochets from one loop and so on until the end of the row.
Row 8 to the end: double crochets.
Having tied the hat, we try it on and use plastic markers to mark the places for the “ears”.

We cast on 10 air loops, knit a row of double crochets and from the next row we cut off each first and last loop. Finally, tighten and thread the thread. Sew to the hat.

We tie a black thread around the perimeter of the hat.

We cast on 16 air loops with black threads. We knit single crochets, turn and in the opposite direction all the loops 2 columns in 1. At the end of the row you will get 8 loops. Which on the next row we reduce to 4 and sew to the hat.
We cast on 3 air loops with black threads, connect them into a ring and knit 14 columns with single crochets. The next row is single crochet, and one more: single crochet, 2 single crochets from one loop and so on until the end of the row.
We sew the eyes to the hat, they have white buttons on them and black buttons on top.

Video: Crochet pilot's hat for a boy: diagram and description

Video: Crochet earflap hat for a boy: diagram and description

Crochet Teddy bear hat diagram and description

The cute Teddy bear is popular with both boys and girls. We offer a simple master class for a Teddy-style hat. We won’t describe it in detail, since it is almost identical to the description of the Minion’s hat. We will only describe the modifications.

To work, you will need a skein of blue yarn, as well as some white, gray and black.

We cast on 3 air loops, connect them into a ring and cast on 14 double crochets. We knit the bottom-pancake, gradually adding loops, and then periodically trying the sides of the hat on the boy so that the hat fits exactly on the head. We tie it around the edge with a crawfish step. The base is ready.

Crochet Teddy bear hat: step 1

Crochet Teddy bear hat: step 4

Using gray threads according to the previous pattern, only a slightly smaller size, we knit a gray even oval as in the photo. Sew to white. We fill it with padding polyester and sew it to the hat.